BC1K Solid Colors (Basecoat Colors)
BC1K Solid Colors (Basecoat Colors)
Automotive Paints Supplier
Product Name/Model:BC1K Solid Colors(Basecoat Colors)
Characteristic:BC1K Solid Color with excellent leveling property,easyconstruction,excellentadhesion power and coveraging power,can match all kinds of solid colors, metallic and pearleffect. Mainly applies to intermediate cars, MPV and bus.
|
Substrates |
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint B. Old paint firm C. 1K or2k primer |
|
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
|
MixingRatio |
BC1k Solid Colors |
Thinner |
|
1 |
1 |
|
|
A 、＜15℃ ：90 Fast Thinner； B 、 15-30℃：91 Standard Thinner； C、＞30℃：92Slow Thinner |
||
|
SprayViscosity |
14-16s todrop off, in 4# viscosity cup at 25°C, |
|
|
ReTreatment |
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. |
|
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 3-5kg/cm 2Suction Feed: 1.4-1.6mm 3-5kg/cm 2 |
|
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 15-20um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
|
|
Package |
1L×12or3.75L×4 |
|
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. To avolid problems of mottlingorpoor adhesion, the metallic paint film should be 15-25um.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
BYTF600-Plastic Primer | Auto Coatings Product Name/Model：BYTF600-Plastic Primer Characteristic: Single-component transparent fast drying primer, used to promote adhesion... |
 |
MF912-1K Binder and MF920-Flip Controller | MF912-1K Binder andMF920-Flip Controller Refinish Automotive Paint Product Name/Model:MF912-1K Binder andMF920-Flip Controller Characteristic: MF... |
 |
BYTF605-Epoxy Primer | Auto Coatings Product Name/Model：BYTF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,... |
 |
MSK-6000 Extra Fast Clear Coat | MSK-6000 Extra Fast Clear Coat Automotive Paints Supplier Product Name/Model:MSK-6000 Extra Fast Clear Coat. Characteristic: Extra fast drying... |
 |
F600-Plastic Primer | F600-Plastic Primer Automotive Paints Supplier Product Name/Model:F600-Plastic Primer Characteristic: Single-component transparent fast drying... |
Похожие товары
 |
Non-Carbon Epoxy Antistatic Anticorrosive Intermediate Paint | Продавец: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Non-carbon epoxy antistatic anticorrosive intermediate paintis two-component. It has high electri... |
 |
BENZENE-FREE SPRAY PAINT | Продавец: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® Benzene-free Spray Paint is a quick-drying benzene-free thermoplastic acrylic resin aero... |
 |
WINDSHIELD CLEANER | Продавец: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® car window cleaner sprayis a high-performing spray that easily removes dirt, grime, grea... |
 |
PARTS CLEANER | Продавец: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® AUTO PARTS CLEANER SPRAYcan quickly dissolve and remove brake powder, oil stains and res... |
 |
CRYSTAL WAX | Продавец: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® Crystal Wax Car Polishis a high-quality super deep care crystal emulsion made of advance... |
