BC1K Solid Colors (Basecoat Colors)
BC1K Solid Colors (Basecoat Colors)
Automotive Paints Supplier
Product Name/Model:BC1K Solid Colors(Basecoat Colors)
Characteristic:BC1K Solid Color with excellent leveling property,easyconstruction,excellentadhesion power and coveraging power,can match all kinds of solid colors, metallic and pearleffect. Mainly applies to intermediate cars, MPV and bus.
|
Substrates |
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint B. Old paint firm C. 1K or2k primer |
|
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
|
MixingRatio |
BC1k Solid Colors |
Thinner |
|
1 |
1 |
|
|
A 、＜15℃ ：90 Fast Thinner； B 、 15-30℃：91 Standard Thinner； C、＞30℃：92Slow Thinner |
||
|
SprayViscosity |
14-16s todrop off, in 4# viscosity cup at 25°C, |
|
|
ReTreatment |
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. |
|
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 3-5kg/cm 2Suction Feed: 1.4-1.6mm 3-5kg/cm 2 |
|
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 15-20um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
|
|
Package |
1L×12or3.75L×4 |
|
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. To avolid problems of mottlingorpoor adhesion, the metallic paint film should be 15-25um.
在线联系供应商
Other supplier products
 |
F605-Epoxy Primer | 1、F605-Epoxy Primer Automotive Paints Supplier Product Name/Model:F605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... |
 |
MSD-0912 1K Binder and MSD-0920 Flip Controller | MSD-0912 1K Binder andMSD-0920 Flip Controller Automotive Refinish Coatings Product Name/Model:MSD-0912 1K Binder andMSD-0920 Flip Controller ... |
 |
BYTF350 Thinner SRA | BYTF350 Thinner SRA Car Paint Thinner Factory Product Name/Model;BYTF350 Thinner SRA Characteristic: An additive helps to achieve an invisble ... |
 |
BYT 2K Series Hardener | BYT 2K Series Hardener Automotive Refinish Supplier Product Name/Model：BYT 2K Series Hardener Characteristic: A series of yellow resistant har... |
 |
MF400-1K Primer Surfacer | 3、MF400-1K Primer Surfacer Automotive Paint company Product Name/Model:MF400-1K Primer Surfacer Characteristic: Fast drying one-component 1K P... |
Same products
 |
Non-Carbon Epoxy Antistatic Anticorrosive Intermediate Paint | 卖方: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Non-carbon epoxy antistatic anticorrosive intermediate paintis two-component. It has high electri... |
 |
BENZENE-FREE SPRAY PAINT | 卖方: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® Benzene-free Spray Paint is a quick-drying benzene-free thermoplastic acrylic resin aero... |
 |
WINDSHIELD CLEANER | 卖方: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® car window cleaner sprayis a high-performing spray that easily removes dirt, grime, grea... |
 |
PARTS CLEANER | 卖方: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® AUTO PARTS CLEANER SPRAYcan quickly dissolve and remove brake powder, oil stains and res... |
 |
CRYSTAL WAX | 卖方: Shenzhen Sunrise New Energy Co.,Ltd. | 7CF® Crystal Wax Car Polishis a high-quality super deep care crystal emulsion made of advance... |
