Methyl Isoamyl Ketone (MIAK) CAS 110-12-3
Introduction
Names and Identifiers
| Name | 5-Methyl-2-hexanone |
| Synonyms | MIAK Isobutylaceton methyl-2-hexanone 5-Methyl-2-hexanone 5-methylhexan-2-one Isoamylmethylketone ketone,methylisoamyl Methyl isoamyl ketone Isopentyl-methylketon methylisopentylketone Isoamyl methyl ketone Ketone, methyl isoamyl Methyl isopentyl ketone (1R)-2-bromo-1-phenylethanol Isopentyl methyl ketone~Methyl isoamyl ketone~MIAK |
| CAS | 110-12-3 |
| EINECS | 203-737-8 |
| InChI | InChI=1/C8H9BrO/c/h1-5.8.10H,6H2/t8-/m0/s1 |
Physico-chemical Properties
| Molecular Formula | C7H14O |
| Molar Mass | 114.19 |
| Density | 0.814 g/mL at 25 °C (lit.) |
| Melting Point | -74 °C |
| Boling Point | 145 °C (lit.) |
| Flash Point | 106°F |
| Water Solubility | 5.4 g/L (20 ºC) |
| Solubility | water: soluble5.4g/L at 25°C |
| Vapor Presure | 4.5 mm Hg ( 20 °C) |
| Vapor Density | 3.94 (vs air) |
| Appearance | Liquid |
| Color | Clear colorless |
| Exposure Limit | TLV-TWA 240 mg/m3 (50 ppm) (ACGIH). |
| BRN | 506163 |
| Storage Condition | Store below +30°C. |
| Explosive Limit | 1.35-8.2%, 93°F |
| Refractive Index | n20/D 1.406(lit.) |
MIAK (Methyl Isoamyl Ketone) has high solvent activity, slow evaporation rate, low density, low surface tension, and a high boiling point. These properties make MIAK a very good solvent for high-solids coatings. Because regulations limit the weight of solvent per gallon of coating, formulators favor the use of low-density solvents that help reduce the VOC content of a coating. MIAK is lower in density than ester, aromatic hydrocarbons, and glycol ether solvents with similar evaporation rates. The low density and high activity of MIAK are significant advantages when formulating low-viscosity, high-solids coatings. In addition, MIAK is useful as a polymerization solvent for high solids acrylic resins.
SYNONYMS & TRADE NAMES：
Isoamyl methyl ketone, Isopentyl methyl ketone, 2-Methyl-5-hexanone, 5-Methyl-2-hexanone, MIAK
The chemical substances for this product are listed as Inert Ingredients Permitted for Use in Nonfood Use Pesticide Products under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). For details on specific permissions.
Applications：
Auto OEM
Auto refinish
General industrial coatings
Paints & coatings
Process solvents
Key attributes：
Excellent solvent activity
High dilution ratio
Inert – Nonfood use
Low density
Low surface tension
Non-HAP
Non-SARA
REACH compliant
Readily biodegradable
Slow evaporation rate
Urethane grade
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Single/two-component epoxy adhesive | Epoxy adhesive is a structural adhesive with high bonding strength. Suitable for bonding various substrates, especially with high bonding strength ... |
 |
Thermal interface material | Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ... |
 |
Epoxy Adhesive | MT 4003/5112/3042/4512LV series and EP242 series: The characteristics of good toughness, wide applicable temperature, and moderate activation time... |
 |
Silicone fluid（MT6000 ） | PRODUCT DESCRIPTION MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid. APPLICATIONS • Thermostatic fluids (-5... |
 |
PVF oil pipe coating | Product Introduction Used for automobile oil pipes. PVF coating characteristics: (PVF) coating is the abbreviation of polyvinyl fluoride (Polyvi... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
