Methyl Isoamyl Ketone (MIAK) CAS 110-12-3
Introduction
Names and Identifiers
| Name | 5-Methyl-2-hexanone |
| Synonyms | MIAK Isobutylaceton methyl-2-hexanone 5-Methyl-2-hexanone 5-methylhexan-2-one Isoamylmethylketone ketone,methylisoamyl Methyl isoamyl ketone Isopentyl-methylketon methylisopentylketone Isoamyl methyl ketone Ketone, methyl isoamyl Methyl isopentyl ketone (1R)-2-bromo-1-phenylethanol Isopentyl methyl ketone~Methyl isoamyl ketone~MIAK |
| CAS | 110-12-3 |
| EINECS | 203-737-8 |
| InChI | InChI=1/C8H9BrO/c/h1-5.8.10H,6H2/t8-/m0/s1 |
Physico-chemical Properties
| Molecular Formula | C7H14O |
| Molar Mass | 114.19 |
| Density | 0.814 g/mL at 25 °C (lit.) |
| Melting Point | -74 °C |
| Boling Point | 145 °C (lit.) |
| Flash Point | 106°F |
| Water Solubility | 5.4 g/L (20 ºC) |
| Solubility | water: soluble5.4g/L at 25°C |
| Vapor Presure | 4.5 mm Hg ( 20 °C) |
| Vapor Density | 3.94 (vs air) |
| Appearance | Liquid |
| Color | Clear colorless |
| Exposure Limit | TLV-TWA 240 mg/m3 (50 ppm) (ACGIH). |
| BRN | 506163 |
| Storage Condition | Store below +30°C. |
| Explosive Limit | 1.35-8.2%, 93°F |
| Refractive Index | n20/D 1.406(lit.) |
MIAK (Methyl Isoamyl Ketone) has high solvent activity, slow evaporation rate, low density, low surface tension, and a high boiling point. These properties make MIAK a very good solvent for high-solids coatings. Because regulations limit the weight of solvent per gallon of coating, formulators favor the use of low-density solvents that help reduce the VOC content of a coating. MIAK is lower in density than ester, aromatic hydrocarbons, and glycol ether solvents with similar evaporation rates. The low density and high activity of MIAK are significant advantages when formulating low-viscosity, high-solids coatings. In addition, MIAK is useful as a polymerization solvent for high solids acrylic resins.
SYNONYMS & TRADE NAMES：
Isoamyl methyl ketone, Isopentyl methyl ketone, 2-Methyl-5-hexanone, 5-Methyl-2-hexanone, MIAK
The chemical substances for this product are listed as Inert Ingredients Permitted for Use in Nonfood Use Pesticide Products under the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA). For details on specific permissions.
Applications：
Auto OEM
Auto refinish
General industrial coatings
Paints & coatings
Process solvents
Key attributes：
Excellent solvent activity
High dilution ratio
Inert – Nonfood use
Low density
Low surface tension
Non-HAP
Non-SARA
REACH compliant
Readily biodegradable
Slow evaporation rate
Urethane grade
Send product request
Other supplier products
 |
STD 2461 Fluorinated surfactant solution | Composition: Fluorinated surfactant solution Appearance: light yellow viscous liquid Active ingredient: 18% Solvent: water/alcohol mixtureApplic... |
 |
Adhesive for micro speakers | With the development of electronic products, speakers are developing in the direction of small cavity, ultra-thin, high sound quality, and high pow... |
 |
Aliphatic polyisocyanate (flexibilizing HDI trimer)-MT3800 | Characterization MT3800 is an aliphatic polyisocyanate (flexibilizing HDI trimer).It is suitable for use as the hardener component for lightfast p... |
 |
Tires Use Melamine Adhesive | Introduction This series of products is a rubber adhesive made by mixing high methoxy etherified melamine resin with different proportions of prec... |
 |
PUR reactive polymer | Introduction PUR reactive polyurethane is a single component, moisture reactive structural adhesive. It has the characteristics of fast initi... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
