Non Modified Cellulose Ether
Introduction
Non Modified Cellulose Ether
To improve the workability properties of Portland cement and gypsum based dry mortars, such as plaster, render, tile adhesive and EIFS mortar.
Storage
Non Modified Cellulose Ether is non-perishable product. It is recommended to use the products in rotating on a first in first out basis. The products should be stored under dry and clean conditions in its original packaging and away from heat.The products are hydroscopic. The packaging is selected in a way to avoid ingress of moisture, but the water content of the packed product will / may increase if not stored dry.
Product safety
According to the EU legislation on dangerous substances and preparations, Non Modified Cellulose Ether is not hazardous. Further data on the safety aspects of Non Modified Cellulose Ether types are given in the Safety Data Sheets.
Customer notice and Disclaimer
The products and related information provided by MT are for manufacturing use only. MT makes no express, implied, or other representation, warranty, or guarantee concerning.
(I) the handling, use, or application of such products, whether alone, in combination with other products, or otherwise,
(II) the completeness, definitiveness, or adequacy of such information for user’s or other purpose,
(III) the quality of such products, except that such products are of MT’s standard quality. Users are advised to make their own tests to determine the safety and suitability of each such product combination for their own purpose. Read and understand the Material Safety Data Sheet (MSDS) before using this product. MT does not recommend any use of its products that would violate ant patent or other rights.
在线联系供应商
Other supplier products
 |
polymeric isocyanate (MT-44V20) | General Properties and Applications MT44V20 is a liquid, dark brown polymeric isocyanate based on diphenylmethane-4,4′-diisocyanate (MDI) wi... |
 |
Automotive Interior – Polyolefin Hot Melt Adhesive | Polyolefin Hot Melt Adhesive in Automotive Interiors: A Comprehensive Overview Polyolefin hot melt adhesives (HMAs) are a vital component in the a... |
 |
Polyurethane based powder coating White | Product Description MT-PA020G is a polyurethane based powder coating, formulated without TGIC and is designed for exterior exposure offering excel... |
 |
Sealing application adhesive | Introduction Polyurethane and epoxy resin materials, different models of products can provide targeted insulation strength, flame retardant perfor... |
 |
Dimethyl Lauryl/myristyl Amine CAS 84649-84-3 | Introduction Chemical Name Dimethyl Lauryl/myristyl Amine Product Category Fatty Tertiary Amine CAS No. 84649-84-3 Con... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
