CAS
4-Fluoro-1.3-dioxolan-2-one CAS
| Purity / Analysis Method | >98.0%(GC) |
| Molecular Formula / Molecular Weight | C3H3FO3= 106.05 |
| Physical State (20 deg.C) | Liquid |
| Storage Temperature | Refrigerated (0-10°C) |
| Store Under Inert Gas | Store under inert gas |
| Condition to Avoid | Moisture Sensitive,Heat Sensitive |
| CAS RN |
Specifications
| Appearance | White or Colorless to Light yellow powder to lump to clear liquid |
| Purity(GC) | min. 98.0 % |
Properties (reference)
| Melting Point | 20 °C |
| Boiling Point | 210 °C |
| Flash point | 102 °C |
| Specific Gravity (20/20) | 1.50 |
| Refractive Index | 1.40 |
– Risk and Safety
| Hazard Symbols | Xn – Harmful |
| Risk Codes | R22 – Harmful if swallowed R36/38 – Irritating to eyes and skin. R43 – May cause sensitization by skin contact R48/22 – Harmful danger of serious damage to health by prolonged exposure if swallowed. |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37 – Wear suitable protective clothing and gloves. |
| WGK Germany | 1 |
| TSCA | Yes |
| HS Code | 29329990 |
– Reference Information
| LogP | -0.435 at 20.1℃ |
| use | fluoroethylene carbonate is an organic solvent-based electronic chemical, which can be used in lithium ion battery electrolyte. lithium ion secondary batteries assembled with positive and negative plates and battery separators are mainly used in the field of battery material research. |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Epoxy Adhesive | MT 4003/5112/3042/4512LV series and EP242 series: The characteristics of good toughness, wide applicable temperature, and moderate activation time... |
 |
hydroxyfunctional polyacrylic dispersion (MT-A-145) | Introduction Characterization MT-A-145 is a water-reducible, hydroxyfunctional polyacrylic dispersion.It is suitable for use in combination w... |
 |
UV Light Curing Adhesive | Introduction UV curable adhesive is a structural bonding adhesive that solidifies by irradiating UV light. The characteristic of UV curable adhes... |
 |
One/Two-Component Epoxy Adhesive | Introduction Epoxy adhesive is a structural adhesive with high bonding strength. Suitable for bonding various substrates, especially with high bon... |
 |
Benzene Melamine Resin | Introduction to Benzene Melamine Resin (BMR) Benzene melamine resin is a thermosetting polymer synthesized from melamine and formaldehyde, modifie... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
