CAS
4-Fluoro-1.3-dioxolan-2-one CAS
| Purity / Analysis Method | >98.0%(GC) |
| Molecular Formula / Molecular Weight | C3H3FO3= 106.05 |
| Physical State (20 deg.C) | Liquid |
| Storage Temperature | Refrigerated (0-10°C) |
| Store Under Inert Gas | Store under inert gas |
| Condition to Avoid | Moisture Sensitive,Heat Sensitive |
| CAS RN |
Specifications
| Appearance | White or Colorless to Light yellow powder to lump to clear liquid |
| Purity(GC) | min. 98.0 % |
Properties (reference)
| Melting Point | 20 °C |
| Boiling Point | 210 °C |
| Flash point | 102 °C |
| Specific Gravity (20/20) | 1.50 |
| Refractive Index | 1.40 |
– Risk and Safety
| Hazard Symbols | Xn – Harmful |
| Risk Codes | R22 – Harmful if swallowed R36/38 – Irritating to eyes and skin. R43 – May cause sensitization by skin contact R48/22 – Harmful danger of serious damage to health by prolonged exposure if swallowed. |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37 – Wear suitable protective clothing and gloves. |
| WGK Germany | 1 |
| TSCA | Yes |
| HS Code | 29329990 |
– Reference Information
| LogP | -0.435 at 20.1℃ |
| use | fluoroethylene carbonate is an organic solvent-based electronic chemical, which can be used in lithium ion battery electrolyte. lithium ion secondary batteries assembled with positive and negative plates and battery separators are mainly used in the field of battery material research. |
在线联系供应商
Other supplier products
 |
Benzene Melamine Resin | Introduction to Benzene Melamine Resin (BMR) Benzene melamine resin is a thermosetting polymer synthesized from melamine and formaldehyde, modifie... |
 |
Acrylic polyol resin MT-7152-80 | Introduction Characterization Acrylic polyol resin designed for high solid low VOC ACE top coating Form supplied Form supplied is approximately... |
 |
Indanthrone Blue CAS 81-77-6 | Introduction TestItem Specification Contofwater%≤ 2.5 Soluble matter in water %≤ 2.0 Oil a... |
 |
CAS 4415-87-6 | Introduction of the Polyimide Polyimide (sometimes abbreviated PI) is a polymer of imide monomers. Polyimides have been in mass production since 1... |
 |
Tricresyl phosphate (TCP) CAS 1330-78-5 | 1330-78-5 – Names and Identifiers Name Tricresyl phosphate Synonyms TCPKronitex TCPDisflamol TKPPhosflex LindolTritolyl phospha... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
