New Design Pipe Fitting Weld Stainless Steel Concentric Reducer
Stainless Steel Reducer
Reducer: Different diameter pipe, also known as small and small head, is one of the chemical pipe fittings, which is used to connect two different diameter pipes.
Reducer: Different diameter pipe, also known as small and small head, is one of the chemical pipe fittings, which is used to connect two different diameter pipes.
Reducer Fitting factory: HEBEI YARONG PIPE TRADE Co.Ltd
Product information of Stainless Steel Reducer Supplier
Produce name |
Stainless Steel Reducer |
TYPE |
Concentric reducer, Eccentric reducer |
Material |
stainless steel, carbon steel, alloy steel |
Size |
1/2"-100", DN15-DN2000 |
Pressure |
SCH10-SCH160 |
Surface |
Clear, Bright, Brushing |
Packing |
Steel Pallet, Plywood, wooden Pallets |
Origin |
Made in China, Hebei |
Species |
More Than 300 Kinds For Choice |
Manufacturing process of Reducer Fitting
Reducer usually adopts the forming process of reducing plus expanding pressing, expanding pressing or reducing pressing, or stamping forming. The stamping process is mainly for the reducer with some special specifications. The shape of the stamping die can refer to the inner surface dimension design of the reducer, and the blanking steel plate can be punched and drawn by the stamping die.
The expanding process of reducer is mainly to solve the problem that the reducer is difficult to be formed by reducing the diameter of the reducer. The tube blank smaller than the large end diameter of the reducer is used for expanding along the inner diameter of the tube blank with the internal punch.
The Stainless Steel Reducerforming of reducer is to put the tube blank with the same diameter as the big end of reducer into the forming die, and then press along the axial direction of the tube blank to make the metal move along the die cavity and shrink. Because of the different sizes of the reducer, its warping can also be divided into one-time or multiple pressing.
In the process of manufacturing, our company will use the methods of expanding and reducing according to the needs of material and product forming. In the process of reducing or expanding deformation, according to different materials and reducing conditions, cold or hot pressing is adopted. In general, cold pressing is often used, but hot pressing will be used to make reducer in case of severe work hardening caused by multiple diameter changes, thickness deviation or alloy steel materials.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Brushing ASME Carbon Steel Blind Flange Supplier | BrushingASMECarbon Steel Blind Flange Supplier Flange is a part of the connection between the shaft and the shaft, which is used to connect the end... | |
180 DEGREE ELBOW SUPPLIER | 180 DEGREE ELBOW SUPPLIER Elbow: In pipeline system, elbow is a pipe fitting that changes the direction of pipeline and is used to connect the bend... | |
Stainless Steel Concentric Reducer | Stainless SteelConcentric Reducer Reducer: Different diameter pipe, also known as small and small head, is one of the chemical pipe fittings, which... | |
Alloy Steel Bright Welded Elbow | Alloy SteelBrightWelded Elbow Elbow: In pipeline system, elbow is a pipe fitting that changes the direction of pipeline and is used to connect the ... | |
Large Alloy Carbon Steel Stainless Steel Pipe Segmented Hemispherical Domes End Cap Dished Head For Pressure Vessel | Carbon Steel Cap Supplier CAP: A pipe fittings welded to the end of a pipe or mounted on an external thread at the end of the pipe to cover and blo... |