ASTM B163 UNS N08800 Nickel Alloy Tube
GRADE:UNS N08800 (Incoloy 800, Alloy 800)
SIMILAR GRADES:Incoloy 800H/Incoloy 800HT.
STANDARD:ASTM B163/ASME SB163
DENSITY:8.1g/cm³
SPECIFICATIONof :
Out Diameter: 10-1219mm
Wall Thickness: 0.6-30mm
CHEMICALREQUIREMENTSabout :
:%Max
|
Grade |
Composition,% |
|||||||||
|
Ni |
Cu |
Fe |
Mn |
C |
Si |
S |
Cr |
Al |
Ti |
|
|
N08800 |
||||||||||
MECHANICAL PROPERTY:
|
Material and Condition |
Tensile Strength min, ksi (MPa) |
Yield Strength(0.2% offset), min, ksi (MPa) |
Elongation in 2 in. Or 50mm(or 4 D) min,% |
Rockwell Hardness (or equivalent) for annealed ends |
|
Annealed alloy UNS N08800 |
75(517) |
30(207) |
30 |
- |
FEATURESof :
Good resistance to reduction, oxidation, nitriding medium corrosion.
Good resistance to redox alternating medium corrosion.
High metallurgical stability in high temperature long-term applications.
APPLICATIONS:
Vacuum furnace installation, maximum working temperature 1000 degree chlorination equipment, titanium dioxide factory, distiller, bubble tower and condenser, evaporator tube in sodium sulfide manufacturing process, rosin acid treatment equipment in pulp manufacturing, etc.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
ASTM A249 Welded Steel Tube | N08800 Condenser Tube, Heat Exchanger Tube, N08810 Superheater Tube. GRADES:TP304/TP304L, TP316/TP316L/TP316H, TP310s, TP347/TP347H, TP321, N08800... |
 |
Feed Water Heater U-bent Tubes | GRADE:TP304, TP304L, TP304LN, TP316, TP316L, TP316LN, TP439, S44660... STANDARD:ASTMA668, ASTM A213, STM A803 SPECIFICATIONof : Out Diameter: 12.7... |
 |
ASTM B690 UNS N08367 Seamless Pipe | GRADE:UNS N08367 STANDARD:ASTM B690 SPECIFICATION: Out Diameter: 3.2-863.6mm Wall Thickness: 0.6-50.8mm CHMICAL REQUIREMENTSabout : :% Max ... |
 |
ASTM B729 UNS N08024 Steel Pipe | GRADE:UNS N08024 STANDARD:ASTM B729 SPECIFICATIONof : Out Diameter: 3.2-863.6mm Wall Thickness: 0.6-50.8mm CHEMICAL REQUIREMENTSabout : :% ... |
 |
ASTM B668 UNS N08028 Seamless Steel Tube and Pipe | GRADE:UNS N08028 (Alloy28, DIN EN10088-1: W.Nr.1.4563) /INCOLOY® alloy 028 N08028 DENSITY:8.0g/cm³ STANDARD:ASTM B668 / ASTM B709 CHEMICA... |
Похожие товары
 |
Galvanized Steel Grating for Drainage | Продавец: Hebei Canri wire Mesh co.,Ltd | Galvanized Steel Grating for Drainage Steel gratingfor drainage, also known as galvanised draina... |
 |
Floor Grating | Продавец: Hebei Canri wire Mesh co.,Ltd | Floor Grating Floor grating, also known as open grid flooringor bar grating, is a type of structu... |
 |
Serrated Bar Steel Grating | Продавец: Hebei Canri wire Mesh co.,Ltd | Serrated Bar Steel Grating Steel bar gratinghas two surface type: serrated surface and smooth su... |
 |
Stainless Steel Grating | Продавец: Hebei Canri wire Mesh co.,Ltd | Stainless Steel Grating Stainless steel gratinghas been the standard industrial foot walk produc... |
 |
Galvanized Steel Grating | Продавец: Hebei Canri wire Mesh co.,Ltd | Galvanized Steel Grating Galvanized steel gratingis an ideal product for wet, slippery situation... |
