ASTM B163 UNS N08800 Nickel Alloy Tube
GRADE:UNS N08800 (Incoloy 800, Alloy 800)
SIMILAR GRADES:Incoloy 800H/Incoloy 800HT.
STANDARD:ASTM B163/ASME SB163
DENSITY:8.1g/cm³
SPECIFICATIONof :
Out Diameter: 10-1219mm
Wall Thickness: 0.6-30mm
CHEMICALREQUIREMENTSabout :
:%Max
|
Grade |
Composition,% |
|||||||||
|
Ni |
Cu |
Fe |
Mn |
C |
Si |
S |
Cr |
Al |
Ti |
|
|
N08800 |
||||||||||
MECHANICAL PROPERTY:
|
Material and Condition |
Tensile Strength min, ksi (MPa) |
Yield Strength(0.2% offset), min, ksi (MPa) |
Elongation in 2 in. Or 50mm(or 4 D) min,% |
Rockwell Hardness (or equivalent) for annealed ends |
|
Annealed alloy UNS N08800 |
75(517) |
30(207) |
30 |
- |
FEATURESof :
Good resistance to reduction, oxidation, nitriding medium corrosion.
Good resistance to redox alternating medium corrosion.
High metallurgical stability in high temperature long-term applications.
APPLICATIONS:
Vacuum furnace installation, maximum working temperature 1000 degree chlorination equipment, titanium dioxide factory, distiller, bubble tower and condenser, evaporator tube in sodium sulfide manufacturing process, rosin acid treatment equipment in pulp manufacturing, etc.
在线联系供应商
Other supplier products
 |
ASTM A789 UNS S32750 Duplex Stainless Tube | GRADE:UNS S32750 (Alloy 2507, China: 022Cr23Ni5Mo3N) STANDARD:ASTM A789 / ASME SA789 SPECIFICATIONof : Out Diameter:10.29-1219.2mm Wall Thickness:... |
 |
ASTM B111 COPPER AND COPPER ALLOY TUBE | ASTM B111 COPPER AND COPPER ALLOY TUBE C12200 copper tube,copper tube alloy c12200,uns c44300 brass,c44300 tubing,astm b111 c70600 tube ASTM B111Co... |
 |
ASTM A312 TP321/321H STAINLESS STEEL PIPE | , a312 tp 321h pipe, astm a312 321 stainless pipe, a312 321h , a312 gr 321 BAOSTEEL SPECIAL METAL CO.,LTD(BSM)specializes in the supplying of , w... |
 |
ASTM B729 UNS N08024 Steel Pipe | GRADE:UNS N08024 STANDARD:ASTM B729 SPECIFICATIONof : Out Diameter: 3.2-863.6mm Wall Thickness: 0.6-50.8mm CHEMICAL REQUIREMENTSabout : :% ... |
 |
ASTM B444 UNS N06852 Alloy Pipe | GRADE:UNS N06852 STANDARD:ASTM B444 / ASME SB444 SPECIFICATIONof : Out Diameter: 6.35-660mm Wall Thickness: SCH5-SCHXXS Other sizes are avai... |
Same products
 |
Coated Steel | 卖方: CUMIC STEEL LIMITED | Powder coated carbon steelis a type of steel that was applied with an additional layer of organic... |
 |
Carbon Steel Fittings | 卖方: CUMIC STEEL LIMITED | OVERVIEW OF CARBON STEEL FITTINGS Carbon steel pipe fittings chinaare the general name of the pa... |
 |
Carbon Steel | 卖方: CUMIC STEEL LIMITED | As the leading high carbon steel supplierin China, CUMIC Steel's supply capacity covers almost al... |
 |
Angle Steel | 卖方: CUMIC STEEL LIMITED | OVERVIEW OF ANGLE STEEL Formed by bending a single angle in a steel piece, angle steel for salei... |
 |
Aluzinc Steel Coil | 卖方: CUMIC STEEL LIMITED | OVERVIEW OF ALUZINC STEEL COIL Also known as galvalume or aluzinc coated steel, zinc coated stee... |
