CA6NM ASTM A743 A743M
Our company website:
CA6NM ASTM A743 A743M
CA6NM A743 A743M A487
Grade（UNS）：CA6NM (J91540)
Type：12 Chromium,4 Nickel
CA6NM Chemical Requirements:
C(max):0.06
Men(max)：1.00
Si(max)：1.00
P(max):0.04
S(max):0.03
Cr:11.5~14.0
Ni:3.5~4.5
Molybdenum:0.40~1.0
Heat Treatment Requirements:
Heat to 1850°F [1010°C] minimum, air cool to 200°F [95°C] or lower prior to any optional intermediate temper and
prior to the final temper. The final temper shall be between 1050°F [565°C] and 1150°F [620°C].
Microstructure：Martensitic stainless steel
Tensile Requirements:
Tensile Strength, min
Tensile, ksi:110
Tensile, MPa:755
Yield Strength, min
Yield, ksi:80
Yield, MPa:550
Elongation in 2 in. [50 mm] min, %A: 15
Reduction of Area, min, %:35
Alloy Designation:
A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application A451ASTM A451-06 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperatu A487 Standard Specification for Steel Castings Suitable for Pressure Service A351 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts A352 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service A703 Standard specification for steel casting,General requirements,for pressure-containing parts
Features:
- 2. Corrosion resistance 3. Tear resistance 4. Hardness:
Applications of CA6NM:
- 2. Subsequent pellet processing operation in the steel industry
|
Results of materials testing |
|||||||||
|
Chemical Analysis (%) |
|||||||||
|
Pipe No. |
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
|
|
CA6NM |
≤0.06 |
≤1.00 |
≤1.00 |
≤0.04 |
≤0.03 |
||||
|
ZG06Cr13Ni4Mo |
≤0.06 |
≤0.80 |
≤1.00 |
≤0.035 |
≤0.025 |
||||
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Rubber plastic roller | Our company website: Plastic roller is mainly used for crushing, calendering, shaping and other processing of plastic. The outer layer of rubber ... |
 |
Hearth roll | Our company website: Hearth roll is one of the most important parts of the continuous annealing furnace. Its working condition is the decisive fa... |
 |
Wear Resistant and Corrosion Resistant Casting Alloy Tube | Our company website: Designation: A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, f... |
 |
Duplex stainless steel | Our company website: Duplex stainless steel (DSS for short) refers to stainless steel with ferrite and austenite accounting for about 50% resp... |
|
|
CA6NM ASTM A743 A743M | Our company website: CA6NM ASTM A743 A743M CA6NM A743 A743M A487 Grade（UNS）：CA6NM (J91540) Type：12 Chromium,4 Nickel CA6NM Chemical Requirements:... |
Похожие товары
 |
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
Pup Joint 2-7/8"NUE N80 2FT Blast Joint | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t... |
 |
NC50 PIN 4145H XT39 BOX Crossover | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | 1. ВведениеПерекресток представляет собой трубу или корпус для соединения двух различных размеров... |
 |
API 5CT 2-7/8"NUE N80 Tubing Coupling | Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD | 1. Введение Соединительные резьбы NUE представляют собой короткие длины трубы, используемой для ... |
