.

CA6NM ASTM A743 A743M

Our company website:

CA6NM ASTM A743 A743M

CA6NM A743 A743M A487

Grade(UNS):CA6NM (J91540)

Type:12 Chromium,4 Nickel

CA6NM Chemical Requirements:

C(max):0.06

Men(max):1.00

Si(max):1.00

P(max):0.04

S(max):0.03

Cr:11.5~14.0

Ni:3.5~4.5

Molybdenum:0.40~1.0

Heat Treatment Requirements:

Heat to 1850°F [1010°C] minimum, air cool to 200°F [95°C] or lower prior to any optional intermediate temper and

prior to the final temper. The final temper shall be between 1050°F [565°C] and 1150°F [620°C].

Microstructure:Martensitic stainless steel

Tensile Requirements:

Tensile Strength, min

Tensile, ksi:110

Tensile, MPa:755

Yield Strength, min

Yield, ksi:80

Yield, MPa:550

Elongation in 2 in. [50 mm] min, %A: 15

Reduction of Area, min, %:35

Alloy Designation:

A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application A451ASTM A451-06 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperatu A487 Standard Specification for Steel Castings Suitable for Pressure Service A351 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts A352 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service A703 Standard specification for steel casting,General requirements,for pressure-containing parts

Features:

  1. 2. Corrosion resistance 3. Tear resistance 4. Hardness:

Applications of CA6NM:

  1. 2. Subsequent pellet processing operation in the steel industry

Results of materials testing

Chemical Analysis (%)

Pipe No.

C

Si

Mn

P

S

Ni

Cr

Mo

CA6NM

≤0.06

≤1.00

≤1.00

≤0.04

≤0.03

ZG06Cr13Ni4Mo

≤0.06

≤0.80

≤1.00

≤0.035

≤0.025



在线联系供应商

至: 南京鑫烁机械设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

CA6NM ASTM A743 A743M
CA6NM ASTM A743 A743M Our company website: CA6NM ASTM A743 A743M CA6NM A743 A743M A487 Grade(UNS):CA6NM (J91540) Type:12 Chromium,4 Nickel CA6NM Chemical Requirements:...
Sink Roll
Sink Roll Our company website: The roller can be applied in not only metallurgy industry but other appliance. 1. Furnace roller 2. Hearth roll 3. Sink rol...
Wear Resistant and Corrosion Resistant Casting Alloy Tube
Wear Resistant and Corrosion Resistant Casting Alloy Tube Our company website: Designation: A743/A743M-13a Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, f...
Grease Roll
Grease Roll Our company website: Roll blank is cast by imported centrifugal compound casting equipment. High Ni Cr Mo alloy is adopted, the thickness of the ...
Duplex stainless steel
Duplex stainless steel Our company website: Duplex stainless steel (DSS for short) refers to stainless steel with ferrite and austenite accounting for about 50% resp...
供应产品

Same products

API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling
API 5CT L80 1CR/3CR/9CR/13CR NUE/EUE copper plated coupling 卖方: Tianjin Wenxin Energy Technology Co.,LTD Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T...
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint
L80 3CR/9CR/13CR 3-1/2 NUE/EUE 4FT Pup Joint 卖方: Tianjin Wenxin Energy Technology Co.,LTD Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t...
Pup Joint 2-7/8NUE N80 2FT Blast Joint
Pup Joint 2-7/8"NUE N80 2FT Blast Joint 卖方: Tianjin Wenxin Energy Technology Co.,LTD Introduction Tubing Pup Joint is a pipe used to transport oil.Tubing pup joint is shorter than t...
NC50 PIN 4145H XT39 BOX Crossover
NC50 PIN 4145H XT39 BOX Crossover 卖方: Tianjin Wenxin Energy Technology Co.,LTD IntroductionCrossover is a tubing or casing for connecting two different sizes, threads and weigh...
API 5CT 2-7/8NUE N80 Tubing Coupling
API 5CT 2-7/8"NUE N80 Tubing Coupling 卖方: Tianjin Wenxin Energy Technology Co.,LTD Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T...