Hot Repairing Mix Gunning Mix Ramming Mix Converter refractory BOF refractories
SG-RB/RX series of hot repair mix is suited for using at trunnion area, taphole area and large working surface in converter. Taking high purity magnesia as main raw material, added and treated with unique organic bond, this mix enjoys some advantages like high adhesive strength, low smoke good flowability under high temperature condition and superior resistance to erosion/corrosion. It’s one of the best refractory materials for repairing the working lining of the converter. Upon getting thrown on the lining, SG-RB/RX mix will get softened quickly and spread over the worn out area and settle. With sintered layer on working surface fill up the gap and protect further erosion of the bricks, the service life of the converter hence can be extended. SG-ZL series of gunning mix is developed keeping in view the installation features of gunning materials and the steel making techniques of a converter. Superior magnesite and MgO-Cal based compounds are the main raw materials, treated with unique binders and other additives. SG-ZL series of gunning mix offers high adhesive strength, low rebound rate, good sinterability, and superior resistance to erosion/corrosion. They are optimal products for both cold and hot repair maintenance of converter lining. SG-ZL series of gunning mix is developed keeping in view the installation features of gunning materials and the steel making techniques of a converter. Superior magnesite and MgO-Cal based compounds are the main raw materials, treated with unique binders and other additives. SG-ZL series of gunning mix offers high adhesive strength, low rebound rate, good sinterability, and superior resistance to erosion/corrosion. They are optimal products for both cold and hot repair maintenance of converter lining. SG-DS series of ramming mix based on Alumina-Magnesia is made of corundum and fused Magnesite, and treated with additives. They have advantages of superior resistance to erosion/corrosion and easy installment. They are widely used as filling mix around seating block of the ladle and tundish bottom, and as casting mix around the converter mouth.
Другие товары поставщика
|
|
Refractories Tundish Sliding Plates Burned Slide Plates Alumina Zirconia Carbon Sliding Plate |
High-temperature burned slide plates have high strength, high erosion/ corrosion resistance, excellent thermal shock resistance and designed for lo... |
|
|
EAF/Electric Arc Furance Refractory Graphite Electrode UHP HP EAF |
Graphite electrode is made of high-quality low ash materials,such as petroleum coke,needle coke and coal pitch.After calcining,burdening,kneading,f... |
|
|
Si3N4 bonded SiC block Semi-graphitized Sidewall Carbon Block SiC Mortar |
Its micro structures show SiC grains are surrounded by phase, the phase is composed of granular SiC and fiber-type Si3N4 made by in-situ reaction, ... |
|
|
Gas Suspension Furnace Abrasion Resistance Castable Leight Wt Insulation Castables anchor brick |
Abrasive castables for gas suspension furnace are made from dense high strength aggregate, composite micro-powder and special additive. And they ha... |
|
|
Ladle Tundish High Performance Slide Plates Fired Slide Plates Unburned Slide Plates |
Traditionally slide plates have been Al-Zr2O3-C based. Although these types of slide plates feature good thermal shock resistance and high strength... |
Все товары поставщика
Похожие товары
