Hot Repairing Mix Gunning Mix Ramming Mix Converter refractory BOF refractories
SG-RB/RX series of hot repair mix is suited for using at trunnion area, taphole area and large working surface in converter. Taking high purity magnesia as main raw material, added and treated with unique organic bond, this mix enjoys some advantages like high adhesive strength, low smoke good flowability under high temperature condition and superior resistance to erosion/corrosion. It’s one of the best refractory materials for repairing the working lining of the converter. Upon getting thrown on the lining, SG-RB/RX mix will get softened quickly and spread over the worn out area and settle. With sintered layer on working surface fill up the gap and protect further erosion of the bricks, the service life of the converter hence can be extended. SG-ZL series of gunning mix is developed keeping in view the installation features of gunning materials and the steel making techniques of a converter. Superior magnesite and MgO-Cal based compounds are the main raw materials, treated with unique binders and other additives. SG-ZL series of gunning mix offers high adhesive strength, low rebound rate, good sinterability, and superior resistance to erosion/corrosion. They are optimal products for both cold and hot repair maintenance of converter lining. SG-ZL series of gunning mix is developed keeping in view the installation features of gunning materials and the steel making techniques of a converter. Superior magnesite and MgO-Cal based compounds are the main raw materials, treated with unique binders and other additives. SG-ZL series of gunning mix offers high adhesive strength, low rebound rate, good sinterability, and superior resistance to erosion/corrosion. They are optimal products for both cold and hot repair maintenance of converter lining. SG-DS series of ramming mix based on Alumina-Magnesia is made of corundum and fused Magnesite, and treated with additives. They have advantages of superior resistance to erosion/corrosion and easy installment. They are widely used as filling mix around seating block of the ladle and tundish bottom, and as casting mix around the converter mouth.
Other supplier products
|
|
Sintered mullite brick & Zircon mullite brick Reractories Glass Industry Lining Brick |
Full Series refractories for Glass industry, including AZS Bricks 41#,AZS Bricks 36#,AZS Bricks 33#, PT series, QX series, ZWS series, WS series et... |
|
|
Clay brick Low Creep Fireclay brick Hot Blast Stove Combustion Regenerator |
Full Series refractories for Hot Blast Stove, including Low Creep Alumina brick, High Alumina Insulation Brick Fireclay Insulating Brick, Floating ... |
|
|
Metallurgy Refractory Reheating Furnaces Honeycomb Regenerator Cast Regenerator Ball Regenerator BurnerRegenerative Case Barrier |
Our products have the following advantages： Low pressure loss Wide specific area, Fast heat-transfer speed and Excellent thermal shock resistance L... |
|
|
Three Casting Block Shroud Mono Block Stopper Submerged Entry Nozzle Tundish Refractories |
Ladle shroud is the refractory to connect ladle to tundish. It stabilizes steel stream and protect the steel from oxidation and splashing. The seri... |
|
|
Ladle Refining Furnace Roof EAF Delta Roof Tapping spout |
Excellent thermal shock resistance ,Good erosion/corrosion resistance ,Long service life |
供应产品
Same products
