Strut Roll Forming Machine
Technical parameters
Product length: 3000 mm~ 6000 mm
Parameters of the raw material:
Material Thickness Width I.D. Max. O.D. Yield strength Max. coil weight
SS316L,
Cold rolled steel 1.5, 2,
2.5 mm According to the profile Ф508 mm Ф1200 mm ≤400Mpa 3 T
Quality requirements of the raw material
Thickness Tolerance Width Tolerance Steel straightness I.D. Tolerance Material standard
± 0.07 mm +0 mm/-0.2 mm 0.2 mm/m ±15 mm GB
Note
Plate surface unevenness tolerance: ≤10% of the steel thickness)
If the plate with a coating, the coating should be consistent with the coating inspection standards of the relevant color-coated, should not have skin off, so as not to affect the quality of roll forming.
If the material is galvanized steel, the galvanized should be consistent with the relevant testing standards of the galvanized steel, should not have zinc layer off, so as not to affect the quality of roll forming.
Main Technical conditions of the production line:
Temperature: -10℃~35℃
Voltage: 415V, 50 HZ, 3 P
Gas pressure: 0.6~1.2 Mpa
Total gas: 300 L/min
Total power: ≈80 KW
Machine group operation direction: From left to right.
(Facing the operational panel)
Production capacity: 8 m/min (according to the basic length: 3000mm )
Dimension (L*W*H): L≈ 28 m, W≈ 5 m, H≈ 2 m
Specification of the shipping container:(the number is estimated ≈, final data should be confirmed in two weeks before delivery.)
Container 40GP 40OH 40OT 20GP 20OH 20OT
Product process flow:
Decoiling → Levelling → Loop → Servo Feeding → Punching Machine → Loop → Roll Forming
→ Cut To Length → Run Out Table
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
CNC motorcycle billet machining parts | Motorcycle billet parts can be machined by our CNC machining center. Our CNC machining is great to meet a range of your product developmentneeds.... |
 |
3 profiles Track&stud roll forming machine | Main Technical Parameter1)Suitable material Galvanized sheetWidth see the profileThickness 0.5mmYield strength 230-300 MpaCoil weight 2T2) Formin... |
 |
Roofing machine | Roofing machine is mainly used in the production of colored steel sheets. The machine is artistically made and transmits smoothly at a low noise.... |
 |
Light Steel Keel Roll Forming Machine | Technical Parameters1 Suitable material Type Galvanized sheet plateThickness (mm) 0.85-1.6mmTensile strength (Mpa) 235-300MpaWidth (mm) Refer to ... |
 |
Cantilever Type Cable Tray Roll Forming Machine | Technical parametersRaw Material: Cold-Rolled Steel, galvanized SteelYield Strength: 235MpaThickness: 1.0-2.5mmRaw Material Coil Width: Depends o... |
Похожие товары
 |
spillway gates for Flood control | Продавец: BEIJING IWHR CORPORATION. | spillway gates for Flood control Our Spillway Gates for Flood Controlare designed to provide pre... |
 |
mining filter press | Продавец: 00000 | Mining Water Treatment Filter Press Our is designed to efficiently treat and filter water ... |
 |
EV Battery Smart Factory Solution | Продавец: Huiyao Laser Technology (Luoyang) Co., Ltd. | EV Battery Smart Factory Solution is an advanced, intelligent manufacturing system designed... |
 |
Battery Smart Factory Solution | Продавец: Huiyao Laser Technology (Luoyang) Co., Ltd. | Huiyao Laser Battery Module Automation Assembly Line is at the forefront of advanced manufa... |
 |
Industrial Steel Pipe Automatic Welding Machine | Продавец: Guangdong Shunde Seko Machinery & Technology Co., Ltd | SEKO Machinery industrial steel pipe automatic welding machine specializes in industrial usage, l... |
