Strut Roll Forming Machine
Technical parameters
Product length: 3000 mm~ 6000 mm
Parameters of the raw material:
Material Thickness Width I.D. Max. O.D. Yield strength Max. coil weight
SS316L,
Cold rolled steel 1.5, 2,
2.5 mm According to the profile Ф508 mm Ф1200 mm ≤400Mpa 3 T
Quality requirements of the raw material
Thickness Tolerance Width Tolerance Steel straightness I.D. Tolerance Material standard
± 0.07 mm +0 mm/-0.2 mm 0.2 mm/m ±15 mm GB
Note
Plate surface unevenness tolerance: ≤10% of the steel thickness)
If the plate with a coating, the coating should be consistent with the coating inspection standards of the relevant color-coated, should not have skin off, so as not to affect the quality of roll forming.
If the material is galvanized steel, the galvanized should be consistent with the relevant testing standards of the galvanized steel, should not have zinc layer off, so as not to affect the quality of roll forming.
Main Technical conditions of the production line:
Temperature: -10℃~35℃
Voltage: 415V, 50 HZ, 3 P
Gas pressure: 0.6~1.2 Mpa
Total gas: 300 L/min
Total power: ≈80 KW
Machine group operation direction: From left to right.
(Facing the operational panel)
Production capacity: 8 m/min (according to the basic length: 3000mm )
Dimension (L*W*H): L≈ 28 m, W≈ 5 m, H≈ 2 m
Specification of the shipping container:(the number is estimated ≈, final data should be confirmed in two weeks before delivery.)
Container 40GP 40OH 40OT 20GP 20OH 20OT
Product process flow:
Decoiling → Levelling → Loop → Servo Feeding → Punching Machine → Loop → Roll Forming
→ Cut To Length → Run Out Table
在线联系供应商
Other supplier products
CNC motorcycle billet machining parts | Motorcycle billet parts can be machined by our CNC machining center. Our CNC machining is great to meet a range of your product developmentneeds.... | |
CNC electronic bike lathe spare parts machining | Besides the cnc machining services, we also provide lathe services. We often apply our lathe capabilities to non-bulk orders of parts or hardware... | |
Roof tile making machine | This roof tile making machine is always used to produce the color steel or Galvanized steel roof tile.The roof tile making machine is a new gener... | |
CNC aluminum machined parts | Aluminum is a popular material for many metal parts and components,such as : Auto Parts,Optical Reflectors,Cooking Utensils,Aircraft Parts,Lighti... | |
Floor deck roll forming machine | The surface of Floor Decking Steel Sheet produced by this floor deck forming machine will be smooth without any scratches. The floor decking is w... |
Same products
Industrial Steel Pipe Automatic Welding Machine | 卖方: Guangdong Shunde Seko Machinery & Technology Co., Ltd | SEKO Machinery industrial steel pipe automatic welding machine specializes in industrial usage, l... | |
146 Roll Forming Machine for ridge cap | 卖方: Hangzhou Roll Forming Machinery Parts Co., Ltd | Main Technical Parameter1 Suitable material Type Colored coating steelThickness (mm) 0.55Yield ... | |
285 Ridge Cap Forming Machine | 卖方: Hangzhou Roll Forming Machinery Parts Co., Ltd | Technical Parameters1Suitable material Type Colored steel sheetThickness (mm) 0.5-0.55Yield Str... | |
100 – 250 Z Purlin Roll Forming Machine | 卖方: Hangzhou Roll Forming Machinery Parts Co., Ltd | 100 – 250 Z Purlin Roll Forming MachineServo Feeding Device (optional)Butt Welding Device... | |
305 c purline forming machine | 卖方: Hangzhou Roll Forming Machinery Parts Co., Ltd | Technical ParametersSuitable material Galvanization steel sheet or hr steel strip;Material Spec... |