AC380V 50HZ SMT Wave Soldering Machine High Power For Full Production Line
CNSMT rich in WAVE SOLDERING develop MACHINE on SMT FULL LINE
Feature
| Control method: Press Kin+PLC (Kelita PCBASE wave soldering control software V1.0) |
| Transport Motor: 1P AC220V, 60W |
| Transport speed: 0～2000mm/min |
| Board size: 30 to 300mm(w) |
| Flux capacity: 6L |
| Pre-heating zone: 1300mm three-stage preheating, 600w*10PCS room temperature～250°C |
| Tin furnace heating: 1.2KW * 9PCS room temperature ~ 300 °C |
| Tin furnace capacity: 210KG (lead and tin materials are used) |
| Peak height: 0～12MM |
| Crest Motor: 3P AC220V, 0.18KW*2PCS |
| Washing claw pump: 1P AC220V 6W |
| Transport direction: Left → Right |
| Welding angle: 3 ~ 6 o |
| Flux Pressure: 3 to 5 BAR |
| Power Supply: AC380V 50HZ |
| Normal operating power / total power: 5KW/18KW |
| Dimensions: 3600(L)*1200(W)*1650(H) MM |
| Body size: 2700(L)*1200(W)*1650(H) MM |
| Net weight: 890KG |
Application
Failure analysis
Fold residue more
1. FLUX has a high solids content and does not contain too much volatiles.
2. The preheating is not performed before welding or the preheating temperature is too low (the time is too short for dip soldering).
3. Take the board too fast (FLUX failed to fully evaporate).
4. Tin furnace temperature is not enough.
5. There are too many impurities in the tin furnace or the tin is low.
6. Added anti-oxidant or anti-oxidation oil.
7. Apply too much flux.
8. There are too many scorpions or open components on the PCB and there is no warm up.
9. The component legs and plate holes are out of proportion (the holes are too large) to increase the flux.
10. The PCB itself has pre-coated rosin.
11. In the tin-bismuth process, FLUX is too wettable.
12. PCB process problems, too few vias, causing FLUX volatility.
13. Hand solder immersed in the wrong angle of the PCB.
14. During the use of FLUX, no diluent was added for a long time.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
|
|
KHJ-MC500-000 Electronic Feeder , YS12 Yamaha Feeder 1 Year Warranty | KHJ-MC100-000 KHJ-MC100-003 YS KHJ-MC200-000 YAMAHA12/16mm SS12MM KHJ-MC400-000 KHJ-MC400-002 24MM KHJ-MC500-000 YAMAHA32mm KHJ-MC600-00... |
|
|
KHN-M7790-A1X 9498 396 02251 YAMAHA YS24 YG12 YS24 309A Round suction nozzle | KHN-M7790-A1X 9498 396 02251 YAMAHA YS24 YG12 YS24 309A Round suction nozzle Mounter Yamaha nozzle 309A nozzle YG12YG300Ys12 309 nozzle khn-m7790-... |
|
|
SMT panasonic Nozzle cm602 cm402 npm 1001 1002 1003 1004 1005 ORIGINAL led | CM602 12N210098763AB N210007284AB NPMN510041345AA 2N510067900AA MTNS000238AA N510028410AA N610099746AA N510053249AA N510049696AA N6100... |
|
|
Small CTF081PR 8mm Feeder , Lightweight Juki Feeder High Performance | Supply all juki feeder and juki spare parts.40081758 JUKI CF03HPR 8mm TAPE FEEDER UNIT FOR 060340081759 JUKI CF05HPR 8mm TAPE FEEDER UNIT FOR 10054... |
|
|
SMT Stick Feeder KXFW1KSRA00 For Panasonic CM602 Pcb Assembly Equipment | SMT Stick Feeder KXFW1KSRA00 Original New Use in Panasonic CM602 Pcb Assembly Equipment 8*2MM P / E M9A5NWM0000 double reel8*4MM P / E M9A1NWM0000 ... |
Похожие товары
 |
High voltage slip-ring motors | Продавец: Hebei Changli Electric Tech. Co., Ltd. | Changli high voltage modular induction motors allow industries to operate within a wide power ran... |
 |
A4 Series High Voltage Electric Motors with GOST Standards | Продавец: Hebei Changli Electric Tech. Co., Ltd. | A4 Series High Voltage Electric Motors with GOST Standards A4 Series High Voltage Motors and Y Se... |
 |
IEC Standard/ GOST Standard Medium Voltage Electric Motors/Asynchronous Motors | Продавец: Hebei Changli Electric Tech. Co., Ltd. | Y (A4), YKK(DAZO) series high-voltage three-phase asynchronous motor (framesize 355~1120mm) is a ... |
 |
YE3 Series Three-Phase Asynchronous Motors | Продавец: Hebei Changli Electric Tech. Co., Ltd. | Applicable scope:General-purpose places that need energy conservation and continuous operation, s... |
 |
2rb 310-7AA01 Side Channel Blower | Продавец: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The ... |
