AG-39 Magnetic Cylinder Sensor
AG-39 series magnetic induction sensor
AG-39 series adopts special peak-shaped screws, which can be used for most brands of T-slot cylinders such as FESTO, SMC, PARKER; the way of direct installation above the groove can save users a lot of loading and unloading time. AG-39 can be used with clamps for standard cylinders such as tie rod, mickeymouse type and round type.
Specification of AG-39 Magnetic Air Cylinder Sensor
|
Model |
AG-39DF |
AL-39N |
AL-39P |
|
Switching Logic |
Normally Open |
Solid State Output, Normally Open |
|
|
Output Type |
2 Wire Solid State |
NPN Current Sinking |
PNP Current Sinking |
|
Voltage Range |
10～30V DC |
5～30V DC |
|
|
Sensor Current |
1～50 mA |
0～200 mA |
|
|
Switch Rating |
6 W Max. |
||
|
Consumption |
/ |
3 mA Max.@24V |
|
|
Voltage Drop |
|||
|
Leakage Current |
90 μA Max.@28V |
||
|
Indicator |
Red LED |
Red LED |
Green LED |
|
Cable |
Φ2.8, 2C, Grey Oil-Resistant PUR |
Φ2.8, 3C, Grey Oil-Resistant PUR |
|
|
Sensitivity |
40～800 Gauss |
40～800 Gauss |
|
|
Sensor Frequency |
900Hz |
900Hz |
|
|
Temperature |
-10～70℃ |
-10～70℃ |
|
|
Shock |
50G |
50G |
|
|
Vibration |
9G |
9G |
|
|
Ingress Protection |
IP68 (BJ-R200810105A-02) |
IP68 (BJ-R200810105A-02) |
|
|
Protection Circuit |
Surge Suppression |
Power Reverse Polarity; Surge Suppression |
|
|
CE Certificate NO. |
E8A 17 04 53334 007 |
E8A 17 04 53334 008 |
|
|
CNEx Certificate NO. |
|||
|
RoHS 2011/65/EU & (EU) 2015/863 |
|||
|
Reach NO. |
(EC) N 1907/2006 (REACH) |
||
ALIF Sensoris mounted on the cylinder block and will indicate "on" or "off" depending on the proximity to the magnet. Depending on the application, a variety of different magnetic proximity sensor technologies can be used to maximize performance, space, and reliability. According to the ALIF sensor type, there are different installation methods.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
PCF Sensor Bracket | 18mm Sensor Mounting Bracket For AG-49/AG-59 series only, PCF Bracket is a 18mm sensor mounting bracket that is fixed to the tie rod cylinder be... |
 |
AG-27 Magnetic Cylinder Sensor | AG-27 series hydraulic cylinder magnetic sensor The AG-27 magnetic cylinder positionseries is suitable for all 4φC-slot cylinders on the mar... |
 |
PS Sensor Connector | Special for DFGH/AG-26/AG-27 series, PS adapter and magnetic sensor for pneumatic cylindercan be used together Suitable for SMC T-slot cylinder. ... |
 |
DFGE Magnetic Cylinder Sensor | DFGE series magnetic sensor DFGE series is suitable for SMC, AIRTAC 6.2*5.4 T-slot cylinder, can replace AIRTAC DS1-E magnetic switch. Specific... |
 |
PBL Sensor Clamp | Special for AG-49/AG-59 series, PBL clamp is used in Round cylinder of φ6-φ145. Specification of PBL Sensor Clamp Brand ALIF... |
Похожие товары
 |
China made sensor SZCB-01-B01 for power plant | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made sensor SZCB-01-B01 for power plant Dongfang Yoyik has advanced technology and equipme... |
 |
China manufacturer sensor TD-2-50.0 for power generation | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer sensor TD-2-50.0 for power generation Is to use the generator sets of profess... |
 |
China manufacturer sensor TD-2-50.0 for power generation | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer sensor TD-2-50.0 for power generation Is to use the generator sets of profess... |
 |
China factory Ultrasonic transducer 7ML1118-0EA30 for power station | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | ""China factory Ultrasonic transducer 7ML1118-0EA30 for power station Sold by YOYIK. Deyang YOYIK... |
 |
China factory Protector BDM100-M for power station YOYIK is a research and | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Protector BDM100-M for power station YOYIK is a research and development, producti... |
