AG-39 Magnetic Cylinder Sensor
AG-39 series magnetic induction sensor
AG-39 series adopts special peak-shaped screws, which can be used for most brands of T-slot cylinders such as FESTO, SMC, PARKER; the way of direct installation above the groove can save users a lot of loading and unloading time. AG-39 can be used with clamps for standard cylinders such as tie rod, mickeymouse type and round type.
Specification of AG-39 Magnetic Air Cylinder Sensor
|
Model |
AG-39DF |
AL-39N |
AL-39P |
|
Switching Logic |
Normally Open |
Solid State Output, Normally Open |
|
|
Output Type |
2 Wire Solid State |
NPN Current Sinking |
PNP Current Sinking |
|
Voltage Range |
10～30V DC |
5～30V DC |
|
|
Sensor Current |
1～50 mA |
0～200 mA |
|
|
Switch Rating |
6 W Max. |
||
|
Consumption |
/ |
3 mA Max.@24V |
|
|
Voltage Drop |
|||
|
Leakage Current |
90 μA Max.@28V |
||
|
Indicator |
Red LED |
Red LED |
Green LED |
|
Cable |
Φ2.8, 2C, Grey Oil-Resistant PUR |
Φ2.8, 3C, Grey Oil-Resistant PUR |
|
|
Sensitivity |
40～800 Gauss |
40～800 Gauss |
|
|
Sensor Frequency |
900Hz |
900Hz |
|
|
Temperature |
-10～70℃ |
-10～70℃ |
|
|
Shock |
50G |
50G |
|
|
Vibration |
9G |
9G |
|
|
Ingress Protection |
IP68 (BJ-R200810105A-02) |
IP68 (BJ-R200810105A-02) |
|
|
Protection Circuit |
Surge Suppression |
Power Reverse Polarity; Surge Suppression |
|
|
CE Certificate NO. |
E8A 17 04 53334 007 |
E8A 17 04 53334 008 |
|
|
CNEx Certificate NO. |
|||
|
RoHS 2011/65/EU & (EU) 2015/863 |
|||
|
Reach NO. |
(EC) N 1907/2006 (REACH) |
||
ALIF Sensoris mounted on the cylinder block and will indicate "on" or "off" depending on the proximity to the magnet. Depending on the application, a variety of different magnetic proximity sensor technologies can be used to maximize performance, space, and reliability. According to the ALIF sensor type, there are different installation methods.
在线联系供应商
Other supplier products
 |
PS Sensor Connector | Special for DFGH/AG-26/AG-27 series, PS adapter and magnetic sensor for pneumatic cylindercan be used together Suitable for SMC T-slot cylinder. ... |
 |
PF Sensor Connector | Special for DFGH/AG-26/AG-27 series, PF adapter is matched with magnetic sensor Applicable to FESTO T-slot cylinder. Features of PF Adaptor 4 p... |
 |
M8 Sensor Cable | M8 sensor cable is waterproof grade IP68, pins, and holes are gold-plated terminals, stable conductive performance, safe and reliable; Reduces loss... |
 |
AG-01 Magnetic Cylinder Pneumatic Reed Switch Sensor | AG-01 series pneumatic cylinder reed switch sensor The new AG-01 pneumatic reed switch sensor series is suitable for AIRTAC 4.35*4.5 square groo... |
 |
M8 Sensor Cable | M8 waterproof grade IP68, pins and holes are gold-plated terminals, stable conductive performance, safe and reliable; Reduce loss when passing thro... |
Same products
 |
T60404-N4646-X400 | 卖方: 双为（香港）科技有限公司 | 板上安装电流传感器 Current Sensor 25A 3 pri pins +/-15V 产品属性属性值选择属性 制造商: Vacuumschmelze 产品... |
 |
Hangzhi CAFR-A-NP Series PCB Current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CAFR-A-NP系列是航智自主研发的可焊接在PCB电路板上的电流传感器，基于磁通门技术，可实现直流电流和交流电流的隔离测量。 测量范围：±6A至±50A。精度：&... |
 |
Hangzhi CIT High Precision Split Core current transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CIT系列高精度分体式电流传感器是航智基于磁通门技术开发的，可实现直流电流和交流电流的隔离测量。 测量范围：±100A至±1500A。精度：0.05%。线性度：0.... |
 |
BMS300 Automotive Current Sensor Transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | BMS300磁通门传感器由励磁磁环和控制电路组成，正常情况下，控制电路产生固定的励磁电流频率，使磁芯交替处于最大饱和点，当测量电流流过时，通过检测饱和点的对称性来测量一次电流。 BMS系列适用... |
 |
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT6000-SG在现有的直流传感器技术基础上，采用了多点零磁通技术体系和高频纹波传感通道，在全带宽范围内具有较高的增益和测量精度。 关键技术励磁闭环控制技术自励退磁技术多点零磁通技术温控补... |
