AG-39 Magnetic Cylinder Sensor
AG-39 series magnetic induction sensor
AG-39 series adopts special peak-shaped screws, which can be used for most brands of T-slot cylinders such as FESTO, SMC, PARKER; the way of direct installation above the groove can save users a lot of loading and unloading time. AG-39 can be used with clamps for standard cylinders such as tie rod, mickeymouse type and round type.
Specification of AG-39 Magnetic Air Cylinder Sensor
|
Model |
AG-39DF |
AL-39N |
AL-39P |
|
Switching Logic |
Normally Open |
Solid State Output, Normally Open |
|
|
Output Type |
2 Wire Solid State |
NPN Current Sinking |
PNP Current Sinking |
|
Voltage Range |
10~30V DC |
5~30V DC |
|
|
Sensor Current |
1~50 mA |
0~200 mA |
|
|
Switch Rating |
6 W Max. |
||
|
Consumption |
/ |
3 mA Max.@24V |
|
|
Voltage Drop |
|||
|
Leakage Current |
90 μA Max.@28V |
||
|
Indicator |
Red LED |
Red LED |
Green LED |
|
Cable |
Φ2.8, 2C, Grey Oil-Resistant PUR |
Φ2.8, 3C, Grey Oil-Resistant PUR |
|
|
Sensitivity |
40~800 Gauss |
40~800 Gauss |
|
|
Sensor Frequency |
900Hz |
900Hz |
|
|
Temperature |
-10~70℃ |
-10~70℃ |
|
|
Shock |
50G |
50G |
|
|
Vibration |
9G |
9G |
|
|
Ingress Protection |
IP68 (BJ-R200810105A-02) |
IP68 (BJ-R200810105A-02) |
|
|
Protection Circuit |
Surge Suppression |
Power Reverse Polarity; Surge Suppression |
|
|
CE Certificate NO. |
E8A 17 04 53334 007 |
E8A 17 04 53334 008 |
|
|
CNEx Certificate NO. |
|||
|
RoHS 2011/65/EU & (EU) 2015/863 |
|||
|
Reach NO. |
(EC) N 1907/2006 (REACH) |
||
ALIF Sensoris mounted on the cylinder block and will indicate "on" or "off" depending on the proximity to the magnet. Depending on the application, a variety of different magnetic proximity sensor technologies can be used to maximize performance, space, and reliability. According to the ALIF sensor type, there are different installation methods.
Send product request
Other supplier products
| AG-29 Magnetic Cylinder Sensor | AG-29 series magnetic sensor AG-29 series is the smallest magnetic switch in the world so far. It is suitable for 4φ C-slot cylinder. Althou... | |
| M8 Sensor Cable | M8 sensor cable is waterproof grade IP68, pins, and holes are gold-plated terminals, stable conductive performance, safe and reliable; Reduces loss... | |
| Magnetic Sensor Connector | Connector: Housing made of plastic. The ALIF magnetic sensor connector typesare put into the adapter to adapt to more cylinder types, which greatl... | |
| DFGJ Magnetic Cylinder Sensor | DFGJ series magnetic sensor DFGJ series L-slot cylinder specially used for AIRTAC 7.1*3.2, which can replace AIRTAC DS1-J; avoid equipment colli... | |
| AG-09 Magnetic Cylinder Sensor | AG-09 series switch magnetic sensor The new AG-09 series is suitable for AIRTAC 7.1*3.2 L-slot cylinder and can replace AIRTAC DS1-J. The casing... |
Same products
| China factory Signal control board DK-MCJ3004 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Signal control board DK-MCJ3004 for power station Sold by YOYIK. Deyang YOYIK is a... | |
| Made in China Signal board 6ES7288-5CM01-0AA0 for thermal power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Made in China Signal board 6ES7288-5CM01-0AA0 for thermal power plant Selection of advanced tech... | |
| China made Small machine dual LVDT sensor TDZ-1 for power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made Small machine dual LVDT sensor TDZ-1 for power plant Deyang YOYIK is a strong technic... | |
| Linear displacement sensor 181.36.06.G02 power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China supplier Linear displacement sensor 181.36.06.G02 power plant spare parts Main: hydraulic ... | |
| China factory Limit switch DE Ll LX918-11L for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | China factory Limit switch DE Ll LX918-11L for power station YOYIK is a research and development,... |















