QSFP 100G 850nm 100m MPO Transceiver
QSFP 100G 850nm 100m MPO Transceiver(100g sr4) is a parallel 100Gb/s Quad Small Form-factor Plug-gable (QSFP28) optical module. 100g qsfp28 sr4 provides increased port density and total system cost savings. The QSFP28 MPOfull-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s on 100 meters of OM4 muti-mode fiber.
An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector.
The module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
QSFP-100G-SR4 product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA). 100G sr4 transceiver has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
Technical Specification Of QSFP 100G 850nm 100m MPO Transceiver
Absolute Maximum Ratings
It has to be noted that the operation in excess of any individual absolute maximum ratings might cause permanent damage to this module.
|
Parameter |
Symbol |
Min |
Max |
Units |
Note |
|
Storage Temperature |
TS |
-40 |
85 |
℃ |
|
|
Operating Case Temperature |
TOP |
0 |
70 |
℃ |
|
|
Power Supply Voltage |
VCC |
-0.5 |
V |
||
|
Damage Threshold, each Lane |
THd |
dBm |
Recommended Operating Conditions and Power Supply Requirements
|
Parameter |
Symbol |
Min |
Typical |
Max |
Units |
Note |
|
Operating Case Temperature |
TOP |
0 |
70 |
degC |
||
|
Power Supply Voltage |
VCC |
V |
||||
|
Data Rate, each Lane |
Gb/s |
|||||
|
Control Input Voltage High |
2 |
Vcc |
V |
|||
|
Control Input Voltage Low |
0 |
V |
||||
|
Pre-FEC Bit Error Ratio |
5x10-5 |
|||||
|
Post-FEC Bit Error Ratio |
1x10-12 |
1 |
||||
|
Link Distance (OM3 MMF) |
D1 |
70 |
m |
2 |
||
|
Link Distance (OM4 MMF) |
D2 |
100 |
m |
2 |
As an optical transceiver factory, we can offer sorts of related products for sale, if you have needs, please contact us.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
QSFP28 100G Copper Twinax Cable XM DAC | QSFP28 Direct Attach Cables (dac cable 100g) are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to... |
 |
SFP 1.25G 1550nm 80Km LC Transceiver | GearLink’s gigabit optical transceiver moduleGCS7L0C55 is used in Gigabit Ethernet, dual-channel, and bidirectional transmission synchronous ... |
 |
SFP+ 10G 1310nm 40Km LC Transceiver | SFP+ 10G 1310nm 40Km LC Transceiver is a hot-pluggable SFP+ package/dual LC interface, with DDM digital diagnosis function, metal shell package eff... |
 |
SFP+ 10G Tx1330/Rx1270 10Km LC Transceiver | SFP+ 10G Tx1330/Rx127010Km LC Transceiver belongs to SFP+ BIDI series products. BIDI single-fiber bidirectional optical module needs to use differe... |
 |
SFP+ 10G Tx1330/Rx1270 40Km LC Transceiver | The SFP-10G-BX40 series single mode sfp transceiveris a small form-factor pluggable module for duplex optical data communications such as 10GBASE-L... |
Похожие товары
 |
Unbind and repair iPhone Wi-Fi functionality in minutes | Продавец: Shenzhen Wikshu Technology Co. | Описание Модуль активации JCID WIFI и чип WIFI для iPhone 12/13/14/15/16 Pro Max Отвязка и ремонт... |
 |
HRTC-F2 Control Modules | Продавец: Tinko Instrument (Suzhou) Co., Ltd. | Tinko HRTC-F2 hot runner control module is a special module. It is one module with two zones desi... |
 |
HRTC-C1 Control Modules | Продавец: Tinko Instrument (Suzhou) Co., Ltd. | Tinko HRTC-C1 temp controller moduleis an economic led display module. It is also using industria... |
 |
M6A-XA LED Module | Продавец: Hangzhou Hpwinner Opto Corporation | M6A-XA LEDModule Wholesale The wattage range of M6A-XA IP68 LED module 40W/50W/60W M6A-VA mod... |
 |
M2A-VA LED Module | Продавец: Hangzhou Hpwinner Opto Corporation | M2A-VA Wholesale LEDModule The wattage range of M2A-VA IP68 LED module 40W/50W/60W M2A is the... |
