Double side 8 layers HDI PCB assembly manufacturing
Double side 8 layers HDI PCB assembly manufacturing
● 4 YAMAHA High-speed SMT Lines
● 6 million daily SMT placements capability
● 400,000 daily DIP placements capability
● 500×600 mm Maximum Board Size
● 0.25"x 0.25" Minimum Board Size
● 450 mm Max. Width for Wave-Solder
● Passives Components Down to 0201 Size BGA and VFBGA Leadless Chip Carrier/CSP Double-Sided SMT AssemblyFine Pitch to 08 Mil BGA Repair and ReballPart Removal and Replacement
SMT and DIP/X-RAY Inspection/AOI Testing/In-circuit-test (ICT)/Flying Probe/Function Test/Burn-in/Finished products assembly
What is a high frequency (HF) PCB?
Electronic devices with high frequency is the developing tendency nowadays, especially in wireless network. Satellite communications are developing rapidly, and information products are moving towards high speeds and high frequency. Accordingly, developing new products always requires high-frequency substrates. These communication products, like satellite systems, mobile s, must use high-frequency PCBs.
The characteristics of high frequency PCB.
It has special materials requirements for the high frequency boards for wireless applications and data rates in the high GHz range:
In general, the high frequency can be defined as a frequency above 1 GHz. Currently, PTFE materials are widely used in high-frequency PCB manufacturing, also known as Teflon, and their frequencies are usually higher than 5 GHz. In addition, FR4 or PPO substrates can be used for product frequencies between 1 GHz and 10 GHz.
Check our HF PCB capabilities by reviewing below table:
|
Feature |
Capability |
|
Quality Grade |
Standard IPC 2 |
|
Number of Layers |
2 - 20layers |
|
Build Time |
2days - 5weeks |
|
Material |
RO4003C, RO4350B, Ro3003, Ro3010, RT5880 etc. |
|
Board Thickness |
|
|
Copper Weight(Finished) |
|
|
Min Tracing/Spacing |
3mil/3mil |
|
Solder Mask Sides |
As per the file |
|
Solder Mask Color |
Green, White, Blue, Black, Red, Yellow |
|
Silkscreen Sides |
As per the file |
|
Silkscreen Color |
White, Black, Yellow |
|
Surface Finish |
Electroless nickel/immersion gold (ENIG) - RoHS |
|
Immersion silver - RoHS |
|
|
Immersion tin - RoHS |
|
|
Organic solderability preservatives - RoHS |
|
|
Min Annular Ring |
4mil |
|
Min Drilling Hole Diameter |
6mil |
|
Impedance tolerance |
±10% |
|
Other Techniques |
Peelable solder mask |
|
Gold fingers |
|
|
Carbon oil |
|
|
Countersink holes |
Let’s start to discuss your pcb boardtoday?Just click your favorite button in the right side.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Aluminum PCB | Characteristics of aluminums PCB Aluminum PCB has good heat dissipation in the circuit design. Aluminum PCB can reduce temperature, improve produ... |
 |
8 layer 1mm HDI PCB 0 gap | 8 layer 1mm HDI PCB 0 gap 8 layer PCB,0 gap PCB,1mm PCB 1)Thickness: 0.1mm-5mm 2)Minimum linewidth：0.075mm/3mil 3)Minimum gap：0.065/2.8mil 4)Minimu... |
 |
Custom high precision electronic SMT PCB assembly service | Custom high precision electronic SMT Standard printed circuit board Here at CTT, standard PCB service is one-stop services for full-featured print... |
 |
SMT after welding pcba processing manufacturer | SMT after welding pcba processing manufacturer SMT welding circuit board assembly,PCBA Manufacturer 4 YAMAHA High-speed SMT Lines 6 million daily S... |
 |
PCBA manufacturer One stop service Printed circuit board assembly prototype | PCBA manufacturerOne stop service Printed circuit board assembly prototype 4 YAMAHA High-speed SMT Lines 6 million daily SMT placements capability ... |
