Blanket Flammability Test Machine

Introduction

Bed Blanket Flammability Tester is used to detect the flame retardant performance of the bed blanket fabric and the flame spread property of the fabric surface. This test method is to burn the surface of the sample with a standardized flame within a specified time, thereby observing the burning, damage degree or discoloration of the standard test paper. And then, the test fabric is graded. Good repeatability of experimental data can help manufacturers effectively control production and verify product performance.

Standards

ASTM D4151

GB/T11049-2008.

BS 4790.

ISO 6925.

BS 6307.

Structure

Flowmeter :Adjust the gas flow size.

Fire tube : The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe

Windscreen: the upper part of the windshield is provided with glass

The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.

Control panel :Power- power switch ;Start：Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;

Reset :Timer reset /Fire tube reset.

Sample clamp and specimen holder :The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob.

Timer :Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward.

Field Application

Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of bed blanket fabric and flame spreading performance of fabric surface.

The instrument is also suitable for the performance verification of new products developed, quality control of production departments, product performance verification of third-party testing institutions, and the measurement of material performance by laboratories and quality and technical supervision departments.

Operation

●After the sample is ready and the instrument is commissioned, place the assembled sample clamp on the specimen holder.

●Open the gas valve and supply the gas to the fire pipe. Use the electronic igniter to fire the burner

●Press the start button on the control panel. The fire tube moves forward and moved to the test position under the action of the mechanical transmission. Then, Start the ignition of the sample and test paper on the sample holder

●At the same time to start the ignition timing system, the control panel display and record the ignition time. After a second, the fire tube moving backwards, the timer stop time. The experiment is end.

●Finally remove the sample and test paper for rating.

Features

Stainless steel body design

External gas control;Separation design of fire source is safe and reliable, it has the functions of fine gas adjustment and coarse adjustment; The instrument with stainless steel main body is resistant to high temperature and smoke, easy to clean and long service life.

time recording module

High precision digital display timer with 0.1s accuracy, built in standard 1s ignition time, automatically burns and records the time.

flexible specimen holder design

The positioning accuracy of the sample holder ensures the consistency of the position of each combustion and reduces the uncertainty of the test, thus ensuring the accuracy of the test.

Standard burner

The burner of the instrument adopts the standard 18# needle. The compact design ensures the stability of the flame, and it is automatically reset to prepare for the next test after each ignition. It is very convenient to use.

Technical Parameters

	Burn timer:timer (accurate to 0.01s)
Exhaust vent (top) : $12.7mmX12	Igniting time:1S
viewing window: transparency	Windshield size: 368.3x6.35x25.4mm, 12 ga (w*h)
Standard flame height: 16mm	Size of the tBox central substrate size:370x217.5x25.4mm
Sample holder upper plate :round hole	burning chamber diamensions (LxWxH) :373x219x357mm
D: 63.5mm, 88.9x88.9x3.175mm	Diamension (LxWxH) :373x219x515mm
sample holder lower plate:round hole	weight: 35Kg
D: 63.5mm, 76.2x88.9x3.175mm	power: 220V 50HZ

Другие товары поставщика

	Burning dummy test system	Product Introduction: Combustion dummies/Combustion test dummies are used to measure and evaluate thermal and wet comfort in dynamic thermal envir...
	Automatic Wire Stripping Machines	Product Introduction: Automobile wire cutting tester is the main instrument for testing the insulation strength of automobile wire, and it is the ...
	Fogging Tester	Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A...
	Xenon Arc Weatherometer	IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce t...
	UV Accelerated Weathering Tester	Overview： UV light is responsible for almost all photodegradation of durable materials exposed outdoors. The UV tester’s fluorescent lamps s...

Все товары поставщика

Похожие товары

	Mini Jewelry Laser Welding Machine	Продавец: Beijing JCZ Technology Co., Ltd	The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre...
	Pulse Laser Cleaner | Handheld Solution for Precision Surface Cleaning for Rust & Coating	Продавец: Beijing JCZ Technology Co., Ltd	Looking for an efficient and eco-friendly laser cleaning machine? The HCP Series Pulse Laser Clea...
	Mini Type Laser Marking & Engraving Machine – Fiber & UV Laser Options for Precise Marking	Продавец: Beijing JCZ Technology Co., Ltd	This compact, Mini Type fiber laser marking machineis perfectly suited for small businesses, work...
	Large Enclosed Laser Marking & Engraving Machine for Industrial Use	Продавец: Beijing JCZ Technology Co., Ltd	The Large Closed Laser Marking Machineis a high-performance engraving solution designed for indus...
	Axial force wire guide apparatus	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YYT0807 - 2010 :Standard Guide...