Blanket Flammability Test Machine
Introduction
Bed Blanket Flammability Tester is used to detect the flame retardant performance of the bed blanket fabric and the flame spread property of the fabric surface. This test method is to burn the surface of the sample with a standardized flame within a specified time, thereby observing the burning, damage degree or discoloration of the standard test paper. And then, the test fabric is graded. Good repeatability of experimental data can help manufacturers effectively control production and verify product performance.
Standards
ASTM D4151
GB/T11049-2008.
BS 4790.
ISO 6925.
BS 6307.
Structure
Flowmeter :Adjust the gas flow size.
Fire tube : The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe
Windscreen: the upper part of the windshield is provided with glass
The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.
Control panel :Power- power switch ;Start：Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;
Reset :Timer reset /Fire tube reset.
Sample clamp and specimen holder :The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob.
Timer :Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward.
Field Application
Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of bed blanket fabric and flame spreading performance of fabric surface.
The instrument is also suitable for the performance verification of new products developed, quality control of production departments, product performance verification of third-party testing institutions, and the measurement of material performance by laboratories and quality and technical supervision departments.
Operation
●After the sample is ready and the instrument is commissioned, place the assembled sample clamp on the specimen holder.
●Open the gas valve and supply the gas to the fire pipe. Use the electronic igniter to fire the burner
●Press the start button on the control panel. The fire tube moves forward and moved to the test position under the action of the mechanical transmission. Then, Start the ignition of the sample and test paper on the sample holder
●At the same time to start the ignition timing system, the control panel display and record the ignition time. After a second, the fire tube moving backwards, the timer stop time. The experiment is end.
●Finally remove the sample and test paper for rating.
Features
Stainless steel body design
External gas control;Separation design of fire source is safe and reliable, it has the functions of fine gas adjustment and coarse adjustment; The instrument with stainless steel main body is resistant to high temperature and smoke, easy to clean and long service life.
time recording module
High precision digital display timer with 0.1s accuracy, built in standard 1s ignition time, automatically burns and records the time.
flexible specimen holder design
The positioning accuracy of the sample holder ensures the consistency of the position of each combustion and reduces the uncertainty of the test, thus ensuring the accuracy of the test.
Standard burner
The burner of the instrument adopts the standard 18# needle. The compact design ensures the stability of the flame, and it is automatically reset to prepare for the next test after each ignition. It is very convenient to use.
Technical Parameters
|
Burn timer:timer (accurate to 0.01s) |
|
|
Exhaust vent (top) : $12.7mmX12 |
Igniting time:1S |
|
viewing window: transparency |
Windshield size: 368.3x6.35x25.4mm, 12 ga (w*h) |
|
Standard flame height: 16mm |
Size of the tBox central substrate size:370x217.5x25.4mm |
|
Sample holder upper plate :round hole |
burning chamber diamensions (LxWxH) :373x219x357mm |
|
D: 63.5mm, 88.9x88.9x3.175mm |
Diamension (LxWxH) :373x219x515mm |
|
sample holder lower plate:round hole |
weight: 35Kg |
|
D: 63.5mm, 76.2x88.9x3.175mm |
power: 220V 50HZ |
Send product request
Other supplier products
 |
High Precision Fully Automatic Vision Measuring Machine | Product advantages: 1. full mouse, handle type automatic control, simple to use, high efficiency, good stability 2. Can generate tasks for automa... |
 |
Xenon Arc Weather Ometer SI4000 | Introduction： SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natural climate and sunlight conditions. It is suitable for t... |
 |
Paper Dirtiness Tester | Introduction: Paper dust meter is suitable for measuring the dust degree of paper or cardboard, books, toilet paper, tissue paper, etc. The dust ... |
 |
Industrial water purifier | Applicable Standards Industrial water purifier systems adhere to global purity and safety benchmarks, including: ASTM D1193(Specifications fo... |
 |
small to medium sized tanks cleaning nozzles | High impact rotary tank cleaning nozzle Model NO.: STD 4 Working Principle: Impeller is driven by cleaning fluid and drives internal reduction m... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
