Paper folding tester

• 

Standards:

ISO 2758、ISO 2759

ASTM D774、 D774M

TAPPI T 403、TAPPI T 804

Test principle：

The machine uses the motor drive screw to move the fixture. The test fixture is placed between the upper and lower sets, and then press the test key. The upper pressure plate senses the load element on the upper pressure plate and converts the force into a signal to the computer monitor.

Application:

The bursting strength value obtained from this tester provides essential data for:

Quality control in paper and board manufacturing.

Evaluating the strength and protective capability of packaging materials.

Comparing different grades and types of paper and board.

Ensuring materials meet required specifications for their intended use.

Features:

Based on the provided description and typical Mullen testers:

Utilizes a motor drive system (likely for the hydraulic pump or clamping).

Clamping mechanism to hold the specimen securely.

Pressure application system involving a rubber diaphragm and hydraulic fluid.

Pressure transducer or load element to sense the pressure/force applied.

Conversion of the sensed force into a signal for processing.

Output of results to a computer monitor or digital display.

Measurement of pressure at the point of specimen rupture.

Likely includes control features for the rate of pressure increase.

May include features for data logging and reporting (implied by signal to computer).

Components made from materials like stainless steel (SUS#304) for durability and corrosion resistance.

Parameter：

Capacity: 2.5—56KGF/CM2

Resolution: 0.2KGF/CM2

Induction mode: Pressure transducer

Force unit: KPA, LBS/IN2. KGF/CM2

Pressure speed: 170+15ML/MIN

Ring material: stainless steel SUS#304

Другие товары поставщика

	Automotive Bed Liner Strength Testing Machine	Standard ASTM D624(Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers) ISO 37(Rubber, Vulcan...
	Water Vapour Permeability Tester	Information The device is a constant temperature and humidity moisture permeability test device, which is suitable for sportswear and other requ...
	Automatic 55 Gallon Drum washer, 200L Barrel Cleaning Solution	Features: This semi-automatic200 liters barrel cleaning systemutilizes our rotary impingement technology and is designed to blast stubborn residue...
	Seat Ingress/Egress Simulation Tester-QINSUN	Standard ISO 16840(Wheelchair Seating - Test Methods for Determining Mechanical Properties) FMVSS 207(Federal Motor Vehicle Safety Standard for...
	Motorized Notching Machine	Product Introduction: Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughne...

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...