Paper folding tester
Standards:
ISO 2758、ISO 2759
ASTM D774、 D774M
TAPPI T 403、TAPPI T 804
Test principle：
The machine uses the motor drive screw to move the fixture. The test fixture is placed between the upper and lower sets, and then press the test key. The upper pressure plate senses the load element on the upper pressure plate and converts the force into a signal to the computer monitor.
Application:
The bursting strength value obtained from this tester provides essential data for:
Quality control in paper and board manufacturing.
Evaluating the strength and protective capability of packaging materials.
Comparing different grades and types of paper and board.
Ensuring materials meet required specifications for their intended use.
Features:
Based on the provided description and typical Mullen testers:
Utilizes a motor drive system (likely for the hydraulic pump or clamping).
Clamping mechanism to hold the specimen securely.
Pressure application system involving a rubber diaphragm and hydraulic fluid.
Pressure transducer or load element to sense the pressure/force applied.
Conversion of the sensed force into a signal for processing.
Output of results to a computer monitor or digital display.
Measurement of pressure at the point of specimen rupture.
Likely includes control features for the rate of pressure increase.
May include features for data logging and reporting (implied by signal to computer).
Components made from materials like stainless steel (SUS#304) for durability and corrosion resistance.
Parameter：
Capacity: 2.5—56KGF/CM2
Resolution: 0.2KGF/CM2
Induction mode: Pressure transducer
Force unit: KPA, LBS/IN2. KGF/CM2
Pressure speed: 170+15ML/MIN
Ring material: stainless steel SUS#304
在线联系供应商
Other supplier products
 |
Electrical bushing flame retardant tester | Product Introduction: The flame retardant test instrument for electrical bushing is used to measure the flame retardant performance of PVC cold fo... |
 |
Low Temperature Bending Tester | Standards ASTM D1790: Brittleness temperature testing for plastic sheeting under impact. ASTM D1593M: Low-temperature flexibility of coated fabrics... |
 |
Thermal Protective Performance Tester (TPP)-QINSUN | The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through... |
 |
Chemical Protective Robotic Manikin Clothing Testing Equipment | |
 |
Ejection Kinetic Energy tester | Product Introduction: Velocity measuring ejection kinetic energy tester, suitable for ejection projectiles, energy storage ejection toys, non-ener... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
