Paper folding tester
Standards:
ISO 2758、ISO 2759
ASTM D774、 D774M
TAPPI T 403、TAPPI T 804
Test principle：
The machine uses the motor drive screw to move the fixture. The test fixture is placed between the upper and lower sets, and then press the test key. The upper pressure plate senses the load element on the upper pressure plate and converts the force into a signal to the computer monitor.
Application:
The bursting strength value obtained from this tester provides essential data for:
Quality control in paper and board manufacturing.
Evaluating the strength and protective capability of packaging materials.
Comparing different grades and types of paper and board.
Ensuring materials meet required specifications for their intended use.
Features:
Based on the provided description and typical Mullen testers:
Utilizes a motor drive system (likely for the hydraulic pump or clamping).
Clamping mechanism to hold the specimen securely.
Pressure application system involving a rubber diaphragm and hydraulic fluid.
Pressure transducer or load element to sense the pressure/force applied.
Conversion of the sensed force into a signal for processing.
Output of results to a computer monitor or digital display.
Measurement of pressure at the point of specimen rupture.
Likely includes control features for the rate of pressure increase.
May include features for data logging and reporting (implied by signal to computer).
Components made from materials like stainless steel (SUS#304) for durability and corrosion resistance.
Parameter：
Capacity: 2.5—56KGF/CM2
Resolution: 0.2KGF/CM2
Induction mode: Pressure transducer
Force unit: KPA, LBS/IN2. KGF/CM2
Pressure speed: 170+15ML/MIN
Ring material: stainless steel SUS#304
Send product request
Other supplier products
 |
Spray Rating Tester | Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT 23 Applications: Spray Rating Tester is used to determine the ... |
 |
Automobile seat belt fixed point test bench | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test me... |
 |
Electronic single fiber strength meter | Compliance Standards - GB/T14337 - GB/T9997 - GB/T13835.5 - GB/T21120 - ISO5079 - ISO11566 - ASTM D3822 - BS4029 Application Scope - Used... |
 |
Shoe Abrasion Tester | Product Introduction: The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press ... |
 |
Fabric horizontal burning tester | Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
