Midsole Fibreboard Bending Test Machine
Product Introduction:
G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, mid-sole fiberboard zigzag resistance quality.
One end of the sample of shoe fiberboard material is hung in a weight, and one end is fixed in the fixture is continuously reciprocated to the left and right each bending 90 degrees, testing a certain number of times until the break, the number of breaks to determine the flexion index of the bottom plate, as a basis for comparison and selection of the bottom plate.
Reference standard:
QB/T 1472, BS 5131:4.2, SATRA TM3, PM4. PM5. PM6. PM15. PM16, QB/T4329-2012 standard
Product Advantages:
Measures Key Durability: Quantifies the resistance of mid-sole fibreboard to repeated bending and fatigue cracking under tension.
Standard Compliant: Designed to meet relevant national and international standards for testing fibreboard and footwear components (QB/T 1472. BS 5131. SATRA TM3. etc.).
Quantitative Result: Provides an objective numerical result (cycles to break/flexion index) for comparing material performance.
Multiple Testing Stations: Allows simultaneous testing of 6 samples, significantly increasing testing throughput.
Controllable Test Parameters: Enables precise control of the bending angle, speed, and applied tension (via the weight).
Automatic Counting: The integrated counter automatically tracks the number of cycles until sample failure.
Precise Speed Control: The variable frequency motor ensures stable and accurate flexing speed.
Product Features:
Multiple test fixtures/stations (6) for simultaneous testing.
Clamping mechanism at one end of each station to fix the fibreboard sample.
System at the other end of each station to attach a weight (approx. 2kg including clamp) to apply tension to the sample.
Mechanism for continuous reciprocating bending of the samples through a 90° angle.
Controllable flexing speed (60 ± 10 r/min) driven by a variable frequency motor.
LCD digital counter for each station (up to 999.999 cycles) to record cycles to sample break.
Sample holders with specified upper and lower clip lengths (15mm and 10mm) to hold the 80x10mm test piece.
Designed for testing fibreboard samples of a specific size (80x10mm).
Technical specifications:
1. Test fixture: 6
2. Test piece: 80×10mm
3. Reciprocating Angle: 90°
4. The weight includes the clamp: （2±0.01kg）×6
5. Tortuous speed: （60±10）r/min
6. Counter: LCD, 0——999999（7 groups）
7. Sample holder: upper clip length 15mm, lower clip length 10mm
8. Motor: variable frequency motor
9. Volume: 109×26×34cm
10. Power supply: 1∮，AC220V,3A
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
(Ford) Automotive wire flexibility testing machine | Applicable standards: Engineering Specification-Ford Global Wire specificationPART NO. ES-AU5T-1A348-AA Scope of application: Suitable for wir... |
 |
New energy wire and cable extrusion & scraping tester | Product Introduction: The new energy wire and cable extrusion jacket scratching tester is used to test the scratching resistance of the plastic ... |
 |
Thermal and Water-vapour Resistance Tester-QINSUN | Introduction TheThermal and Water-vapour Resistance Testeris a special measurement device used for measurement of thermal and water-vapour resista... |
 |
Moisture friction and wear testing machine | Product Introduction: The hydraulic plastic friction and wear testing machine meets the standard "GB/T3960-2016 plastic sliding friction and wear ... |
 |
Impact strength tester for car seat launching headrest | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle collis... |
Похожие товары
 |
Laser Cutting Machines | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
