Midsole Fibreboard Bending Test Machine
Product Introduction:
G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, mid-sole fiberboard zigzag resistance quality.
One end of the sample of shoe fiberboard material is hung in a weight, and one end is fixed in the fixture is continuously reciprocated to the left and right each bending 90 degrees, testing a certain number of times until the break, the number of breaks to determine the flexion index of the bottom plate, as a basis for comparison and selection of the bottom plate.
Reference standard:
QB/T 1472, BS 5131:4.2, SATRA TM3, PM4. PM5. PM6. PM15. PM16, QB/T4329-2012 standard
Product Advantages:
Measures Key Durability: Quantifies the resistance of mid-sole fibreboard to repeated bending and fatigue cracking under tension.
Standard Compliant: Designed to meet relevant national and international standards for testing fibreboard and footwear components (QB/T 1472. BS 5131. SATRA TM3. etc.).
Quantitative Result: Provides an objective numerical result (cycles to break/flexion index) for comparing material performance.
Multiple Testing Stations: Allows simultaneous testing of 6 samples, significantly increasing testing throughput.
Controllable Test Parameters: Enables precise control of the bending angle, speed, and applied tension (via the weight).
Automatic Counting: The integrated counter automatically tracks the number of cycles until sample failure.
Precise Speed Control: The variable frequency motor ensures stable and accurate flexing speed.
Product Features:
Multiple test fixtures/stations (6) for simultaneous testing.
Clamping mechanism at one end of each station to fix the fibreboard sample.
System at the other end of each station to attach a weight (approx. 2kg including clamp) to apply tension to the sample.
Mechanism for continuous reciprocating bending of the samples through a 90° angle.
Controllable flexing speed (60 ± 10 r/min) driven by a variable frequency motor.
LCD digital counter for each station (up to 999.999 cycles) to record cycles to sample break.
Sample holders with specified upper and lower clip lengths (15mm and 10mm) to hold the 80x10mm test piece.
Designed for testing fibreboard samples of a specific size (80x10mm).
Technical specifications:
1. Test fixture: 6
2. Test piece: 80×10mm
3. Reciprocating Angle: 90°
4. The weight includes the clamp: （2±0.01kg）×6
5. Tortuous speed: （60±10）r/min
6. Counter: LCD, 0——999999（7 groups）
7. Sample holder: upper clip length 15mm, lower clip length 10mm
8. Motor: variable frequency motor
9. Volume: 109×26×34cm
10. Power supply: 1∮，AC220V,3A
在线联系供应商
Other supplier products
 |
Schopper Folding Endurance Tester | Use and Scope of application: 1. the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than 0.25mm paper folding d... |
 |
Geomembrane Environmental Stress Cracking Resistance Tester | Scope of application: The stress cracking strength of polyolefin geomembrane was measured and evaluated by notch constant load tensile test. Durin... |
 |
Flatbed Ironing Tester | Product Overview TheFlatbed Ironing Testeris a precision instrument designed to evaluate fabric performance under simulated ironing conditions. It... |
 |
Universal Wear Tester(UWT)/Stoll Quartermaster | Application: Universal Wear Tester (UWT) is used to determines the wear and abrasion resistance of fabric used in clothing, footwear and industr... |
 |
New warm body dummy tester | Product Description In addition to heat dissipation to the surrounding environment through conduction, convection and radiation, the human body al... |
Same products
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
