Puncture Strength Tester

• 

Get a quote：

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

Introduction to the Device This device is a testing machine used to measure the "puncture strength" when a sample is penetrated by a test needle. As a physical test for battery separators, it can measure the breaking strength of the force applied in the vertical direction. It can be used for evaluating the strength of the separators (isolation membranes) inside lithium - ion batteries and testing the puncture strength of packaging materials such as food packaging films. Features This tester can only measure the puncture strength when the sample is pierced by a needle. The breaking strength under the force in the vertical direction is one of the physical test methods for battery separators, which can be measured by this tester. Technical Requirements 1. **Measurement environment temperature and humidity**: Temperature 20～30°C, humidity 50～70%RH without condensation (Standard temperature and humidity conditions: Temperature 20°C, humidity 65%RH) 2. **Load detection** - Detector: Differential transformer (ring - type dynamometer) - Load (full - scale range): Four - range switching of 100gf, 200gf, 500gf, and 1000gf - Accuracy: Within ±0.5% of the full - scale range 3. **Displacement detection** - Detector: Potentiometer - Maximum displacement: ±0.5mm - Accuracy: Within ±0.5% of the full - scale range 4. **Special test needle tip**: Designed with consideration for the testing of separators, with a diameter of 1mm and a tip shape of 0.5R 5. **Diameter of the middle through - hole of the sample fixing plate**: 10mm 6. **Displacement speed** - Standard measurement: 0.02(mm/sec) <1mm/50sec> - High - sensitivity measurement: 0.0067(mm/sec) <1mm/150sec>. Other settings can also be made as required. 7. **Measurement modes**: Load control mode and displacement control mode. The above two modes can be switched. 8. **Sample size (standard)**: 15mm×15mm or larger, with a thickness of 1mm or less.

Другие товары поставщика

	Large-size Brushing Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com lt is applicable to the industries such ashome text...
	Automotive Cargo Cover Screw Inspection Line	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Automotive Cargo Cover Screw Inspection Line is an automated system designed t...
	AATCC KMS-M6 Washer, KMS-M6D Dryer | ASTM ISO Testing Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The AATCC KMS-M6 Washer and KMS-M6D Dryer are precision textile testing instrument...
	Air Permeability Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Air Permeability Tester of textile fabrics complies with ASTM D737, ISO 9237/723...
	Thermostat testing device	Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com TheThermostat Testing Deviceis a dedicated system for life cycle testing of snap-a...

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...