Puncture Strength Tester

• 

Introduction to the Device This device is a testing machine used to measure the "puncture strength" when a sample is penetrated by a test needle. As a physical test for battery separators, it can measure the breaking strength of the force applied in the vertical direction. It can be used for evaluating the strength of the separators (isolation membranes) inside lithium - ion batteries and testing the puncture strength of packaging materials such as food packaging films. Features This tester can only measure the puncture strength when the sample is pierced by a needle. The breaking strength under the force in the vertical direction is one of the physical test methods for battery separators, which can be measured by this tester. Technical Requirements 1. **Measurement environment temperature and humidity**: Temperature 20～30°C, humidity 50～70%RH without condensation (Standard temperature and humidity conditions: Temperature 20°C, humidity 65%RH) 2. **Load detection** - Detector: Differential transformer (ring - type dynamometer) - Load (full - scale range): Four - range switching of 100gf, 200gf, 500gf, and 1000gf - Accuracy: Within ±0.5% of the full - scale range 3. **Displacement detection** - Detector: Potentiometer - Maximum displacement: ±0.5mm - Accuracy: Within ±0.5% of the full - scale range 4. **Special test needle tip**: Designed with consideration for the testing of separators, with a diameter of 1mm and a tip shape of 0.5R 5. **Diameter of the middle through - hole of the sample fixing plate**: 10mm 6. **Displacement speed** - Standard measurement: 0.02(mm/sec) <1mm/50sec> - High - sensitivity measurement: 0.0067(mm/sec) <1mm/150sec>. Other settings can also be made as required. 7. **Measurement modes**: Load control mode and displacement control mode. The above two modes can be switched. 8. **Sample size (standard)**: 15mm×15mm or larger, with a thickness of 1mm or less.

Other supplier products

	Spray Rating Tester - Test Equipment	Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT 23 Applications: Spray Rating Tester is used to determine the ...
	Oxygen Index Tester - Test Equipment	Limiting Oxygen Index Tester The oxygen index of the material refers to the minimum oxygen concentration that can maintain the combustion of the ma...
	Fabric Coolness Tester - lab instrument	It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different am...
	Smoke Density Test Machine for Building Material, ASTM D2843	In a fire, people are often smoke suffocated or unable to escape because of the invisible road, so in the prevention of fires,smoke density of the ...
	taber abrasion resistance tester	TABER abrasion resistance testerand wear resistance tester can be replaced by wheel and weight,which apply to the abrasion resistance performance t...

Same products

	Blanket Flammability Test Machine	Seller: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Seller: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Seller: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Seller: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Seller: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...