Shoe Bending Stiffness Tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Shoes Bending Stiffness Tester is used to measure bending resistance of whole shoes (France shoe Size 39, 42,and British shoe Size 6,Size 8). Clamp the foreshoes (confirming to 1/3 of palm shoes, located on shaft location), after motor launching, driving to pulley, to make shaft drive the turning board at 100mm/min to impose the strength of 30N to shoes in order to do test.
Description：
Shoe Bending Stiffness Tester – Shoe Rigidity Tester is used to test shoe stiffness/rigidity by flex shoe to certain angle by certain force.
The shoe bending stiffness test is a necessary test before outsole flexing test as per ISO 20344. Footwear which requires force (30±0.5)N to flex lower than 45° from horizontal is not suitable to test on outsole flexing tester.
Principle：
This shoe rigidity is a shoe flexing tester. Clamp the shoe forepart on the machine and apply a force of (30±0.5)N and flex the sample at a speed of (100±10)mm/min until the force has been exerted. Then to measure the angle at this point.
Feature：
1.LCD control, easy operate, and display results digitally.
2.Shoes Bending Stiffness Tester Equip with a decoder on shaft, and inducting angle speed of turning board, showing the value through the display with accuracy of 0.1°.
Parameter:
Capacity：200 N
Bending speed：100mm/min (adjustable)
Sample size：French standard: Size 39, 42 ; British standard : Size 6, 8
Test load：30 N
Bending position：1/3 of shoes
Angle resolution：0.1°
Force resolution：1/50000
Power：1∮AC 220V 50/60HZ 3A
Dimension (W×D×H)：50×45×53 cm
Weights：40kg
Standards:
GB/T 20991 section 8.4.1,
ISO 20344-2021 section 8.4.1,
AS/NZS 2210.2 section 8.4.1,
ISO 17707 section 4.2
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Velcro Fatigue Tester | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The hook and loop fastener fatigue tester/hook and loop tape fatigue strength test... |
 |
Needle burner tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com The device use needle flame to simulate small flame... |
 |
Flatbed Ironing Tester - lab instrument | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com TheFlatbed Ironing Testeris a precision instrument ... |
 |
High-Pressure Friction and Wear Tester | Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com High-Pressure Friction and Wear Tester is a temperature-controlled tribological te... |
 |
Rubbing Color Fastness Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Manual friction fastness tester is the most commonly used instrument for the texti... |
Похожие товары
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
