Shoe Bending Stiffness Tester
Shoes Bending Stiffness Tester is used to measure bending resistance of whole shoes (France shoe Size 39, 42,and British shoe Size 6,Size 8). Clamp the foreshoes (confirming to 1/3 of palm shoes, located on shaft location), after motor launching, driving to pulley, to make shaft drive the turning board at 100mm/min to impose the strength of 30N to shoes in order to do test.
Description：
Shoe Bending Stiffness Tester – Shoe Rigidity Tester is used to test shoe stiffness/rigidity by flex shoe to certain angle by certain force.
The shoe bending stiffness test is a necessary test before outsole flexing test as per ISO 20344. Footwear which requires force (30±0.5)N to flex lower than 45° from horizontal is not suitable to test on outsole flexing tester.
Principle：
This shoe rigidity is a shoe flexing tester. Clamp the shoe forepart on the machine and apply a force of (30±0.5)N and flex the sample at a speed of (100±10)mm/min until the force has been exerted. Then to measure the angle at this point.
Feature：
1.LCD control, easy operate, and display results digitally.
2.Shoes Bending Stiffness Tester Equip with a decoder on shaft, and inducting angle speed of turning board, showing the value through the display with accuracy of 0.1°.
Parameter:
Capacity：200 N
Bending speed：100mm/min (adjustable)
Sample size：French standard: Size 39, 42 ; British standard : Size 6, 8
Test load：30 N
Bending position：1/3 of shoes
Angle resolution：0.1°
Force resolution：1/50000
Power：1∮AC 220V 50/60HZ 3A
Dimension (W×D×H)：50×45×53 cm
Weights：40kg
Standards:
GB/T 20991 section 8.4.1,
ISO 20344-2021 section 8.4.1,
AS/NZS 2210.2 section 8.4.1,
ISO 17707 section 4.2
在线联系供应商
Other supplier products
 |
Single Station Jounce Tester | 1. Product Overview The Single Station Jounce Tester is designed for vibration durability testing of automotive seat cushions and backrests. It ev... |
 |
High and Low Temperature Humidity Test Chamber | High and Low Temperature Humidity Test Chamber is designed for performance and reliability testing of electric vehicle power batteries. It can be i... |
 |
Masks Flame Retardant Tester | Application: Mask Flame Retardant Tester is a special test instrument for flame retardant performance of medical masks, to test the flammability p... |
 |
Fabric Downproof Tester | Standards GB/T 12705.1:Textile -Methods of testing the down-proof properties of fabrics- Part 1: Rubbing test; GB/T 14272：Requirements of down ga... |
 |
KM-5A Particle Abrasion Tester | The KM-5A particle attrition tester is specially designed according to the test method for the determination of catalyst attrition rate in my count... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
