.

Filter Media Testing System

The Filter Media Testing System is designed for precise evaluation of filter media and small filter elements. It measures particle filtration efficiency, pressure drop, and fraction separation efficiency under controlled laboratory conditions. The system supports product development, production monitoring, quality control, and compliance testing across a wide range of filter types, including cabin air filters, engine air filters, and indoor air filters. With high repeatability and internationally comparable results, it is suitable for laboratories, manufacturing facilities, and research institutions.

Application

This system is widely used to test filter media and small filter elements during product development, production monitoring, and quality assurance. It is applicable to cabin air filters, engine air filters, and indoor air filters, and supports testing according to ISO 11155-1, DIN 71460-1, ISO 5011, and ISO 16890. Various versions of the system can be configured to conform to additional international and national standards. Its flexible design allows the use of multiple aerosol types, including SAE dust, NaCl/KCl salts, and DEHS liquid aerosols, to simulate real-world operating conditions and verify filter performance under load.

Standards Compliance

(1) ISO 11155-1: Road vehicles — Air filters for occupants’ compartments — Part 1: particulate filtration test

(2) DIN 71460-1: Road vehicles — Air filters for passenger compartments — Part 1: particulate matter filtration tests

(3) ISO 5011: Air filters for internal combustion engines — Performance testing

(4) ISO 16890: Air filters for general ventilation — Particulate matter efficiency testing

Product Features

(1) Simultaneous measurement of particles in feed gas and clean gas.

(2) Particle size measurement range from 0.2 to 40 µm.

(3) Maximum particle concentration up to 10⁶ particles/cm³ (undiluted).

(4) High repeatability and internationally comparable results.

(5) Compatible with various test aerosols such as SAE coarse powder, NaCl/KCl, and DEHS.

(6) Capable of measuring fraction separation efficiency for load testing with high raw gas concentrations (>1000 mg/m³ ISO Fine, >5000 mg/m³ ISO Coarse).

(7) Flexible filter testing software (FTControl) for automated testing, data collection, and analysis.

(8) Easy operation for trained or untrained personnel, with short setup time.

(9) Mobile setup on casters for convenient relocation.

(10) Low maintenance and reliable operation, reducing overall operating costs.

(11) Verifies the functionality of individual components and the complete system during pre-delivery acceptance and commissioning.

Technical Parameters

ParameterUnitValue
Measurement range (dimensions) nm 10 – 800 (U-SMPS 2050)
Volume flow rate m³/h 0.48 – 5.76 (pressurized operation)
Power supply V, Hz 115/230 V, 50/60 Hz
External dimensions mm 600 × 1800 × 900 (W×H×D)
Inflow velocity cm/s 1.3 – 16 (other specifications available)
Differential pressure measurement Pa 0 – 2,500 (others available upon request)
Media testing area cm² 100
Aerosol type Dust (SAE), Salt (NaCl/KCl), Liquid aerosols (DEHS)
Compressed air supply bar 6 – 8

Отправить запрос, связаться с поставщиком

Кому: Standard Groups
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Transparent Absorbing Wave Temperature and Humidity Vibration Test Chamber
Transparent Absorbing Wave Temperature and Humidity Vibration Test Chamber The Transparent Absorbing Wave Temperature and Humidity Vibration Test Chamber is a high-end testing device capable of simulating complex environme...
Diesel Water Ash Sulfur Mixing Tester
Diesel Water Ash Sulfur Mixing Tester Applications 1. In diesel quality control, homogenization of samples provides representative, homogeneous samples for the analysis of water, ash, ...
Leather Water Vapor Permeability Tester
Leather Water Vapor Permeability Tester The Leather Water Vapor Permeability Tester measures the ability of leather and leather-like materials to transmit water vapor. By assessing the we...
Kinematic Viscosity Tester-Petroleum Products Test Equipment
Kinematic Viscosity Tester-Petroleum Products Test Equipment Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Petroleum Products Kinematic Viscosity Tester is a specialized instrument used...
Taber Shear Scratch Tester (Scratch & Mar)
Taber Shear Scratch Tester (Scratch & Mar) Standards: GB/T 2918.GB/T 6151.GB/T 8424.3.PV3952.BMW GS97034-2.BMW GS97034-9.GMN 3943-2003.FLTM BN 108-13.STD1024-3113.GMW 14698-A,GMW 14688 App...
Все товары поставщика

Похожие товары

Tabletop Xenon Arc Weathering Tester (SunMaster)
Tabletop Xenon Arc Weathering Tester (SunMaster) Продавец: Standard Groups Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat...
Blow-By Test Rig
Blow-By Test Rig Продавец: Standard Groups Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa...
Air filter System(ISO 16890/EN 779)
Air filter System(ISO 16890/EN 779) Продавец: Standard Groups Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a...
Oil Thread Leak Test System
Oil Thread Leak Test System Продавец: Standard Groups Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ...
Manual HEPA/ULPA Filter Scanning Test System
Manual HEPA/ULPA Filter Scanning Test System Продавец: Standard Groups Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan...