Filter Media Testing System
The Filter Media Testing System is designed for precise evaluation of filter media and small filter elements. It measures particle filtration efficiency, pressure drop, and fraction separation efficiency under controlled laboratory conditions. The system supports product development, production monitoring, quality control, and compliance testing across a wide range of filter types, including cabin air filters, engine air filters, and indoor air filters. With high repeatability and internationally comparable results, it is suitable for laboratories, manufacturing facilities, and research institutions.
Application
This system is widely used to test filter media and small filter elements during product development, production monitoring, and quality assurance. It is applicable to cabin air filters, engine air filters, and indoor air filters, and supports testing according to ISO 11155-1, DIN 71460-1, ISO 5011, and ISO 16890. Various versions of the system can be configured to conform to additional international and national standards. Its flexible design allows the use of multiple aerosol types, including SAE dust, NaCl/KCl salts, and DEHS liquid aerosols, to simulate real-world operating conditions and verify filter performance under load.
Standards Compliance
(1) ISO 11155-1: Road vehicles — Air filters for occupants’ compartments — Part 1: particulate filtration test
(2) DIN 71460-1: Road vehicles — Air filters for passenger compartments — Part 1: particulate matter filtration tests
(3) ISO 5011: Air filters for internal combustion engines — Performance testing
(4) ISO 16890: Air filters for general ventilation — Particulate matter efficiency testing
Product Features
(1) Simultaneous measurement of particles in feed gas and clean gas.
(2) Particle size measurement range from 0.2 to 40 µm.
(3) Maximum particle concentration up to 10⁶ particles/cm³ (undiluted).
(4) High repeatability and internationally comparable results.
(5) Compatible with various test aerosols such as SAE coarse powder, NaCl/KCl, and DEHS.
(6) Capable of measuring fraction separation efficiency for load testing with high raw gas concentrations (>1000 mg/m³ ISO Fine, >5000 mg/m³ ISO Coarse).
(7) Flexible filter testing software (FTControl) for automated testing, data collection, and analysis.
(8) Easy operation for trained or untrained personnel, with short setup time.
(9) Mobile setup on casters for convenient relocation.
(10) Low maintenance and reliable operation, reducing overall operating costs.
(11) Verifies the functionality of individual components and the complete system during pre-delivery acceptance and commissioning.
Technical Parameters
| Parameter | Unit | Value |
|---|---|---|
| Measurement range (dimensions) | nm | 10 – 800 (U-SMPS 2050) |
| Volume flow rate | m³/h | 0.48 – 5.76 (pressurized operation) |
| Power supply | V, Hz | 115/230 V, 50/60 Hz |
| External dimensions | mm | 600 × 1800 × 900 (W×H×D) |
| Inflow velocity | cm/s | 1.3 – 16 (other specifications available) |
| Differential pressure measurement | Pa | 0 – 2,500 (others available upon request) |
| Media testing area | cm² | 100 |
| Aerosol type | – | Dust (SAE), Salt (NaCl/KCl), Liquid aerosols (DEHS) |
| Compressed air supply | bar | 6 – 8 |
Send product request
Other supplier products
 |
Windshield Washer Nozzle Fatigue Test Machine | You can use this machine to assess the functional reliability, spray performance, and environmental endurance of automotive nozzles. Typical applic... |
 |
Universal Wear Tester | Testing Equipment | Universal Wear Tester (UWT) is used to determines the wear and abrasion resistance of fabric used in clothing, footwear and industrials. Supplied w... |
 |
MMT Liquid Water Separation Tester | Testing Equipment | TheMMT Liquid Water Separation Testeris a precision instrument designed to evaluate the water repellency and separation efficiency of textile mater... |
 |
Vacuum cleaner filter efficiency test equipment - lab instrument | We are a professional testing instrument manufacturer offering complete laboratory testing solutions. If you need more information or wish to explo... |
 |
General Ventilation Test Bench | According to the ISO16890-2016 standard, the test bench is mainly used for the testing of general ventilation air filters. Based on the performance... |
Same products
 |
Dynamic Shear Rheometer | Seller: Standard Groups | Dynamic Shear Rheometers are configured to meet the demands of everyday quality control testing o... |
 |
Noxious Gas Test Chamber | Seller: Standard Groups | Noxious gas tеst chambеrs play a crucial role in thе industrial sector by еnsuring thе longеvity ... |
 |
Chest Drainage Tester | Seller: Standard Groups | The Chest Drainage Tester is a precision instrument designed to evaluate the performance of dispo... |
 |
Plastic Smoke Density Tester | Seller: Standard Groups | You can use the F313 Plastic Smoke Density Tester in the following areas: Plastics industry: Eva... |
 |
Washing Fastness testing machine | Seller: Standard Groups | G228B washing fastness tester is used for washing, dry-clean color fastness testing. Electric tou... |
