Filter Media Testing System
The Filter Media Testing System is designed for precise evaluation of filter media and small filter elements. It measures particle filtration efficiency, pressure drop, and fraction separation efficiency under controlled laboratory conditions. The system supports product development, production monitoring, quality control, and compliance testing across a wide range of filter types, including cabin air filters, engine air filters, and indoor air filters. With high repeatability and internationally comparable results, it is suitable for laboratories, manufacturing facilities, and research institutions.
Application
This system is widely used to test filter media and small filter elements during product development, production monitoring, and quality assurance. It is applicable to cabin air filters, engine air filters, and indoor air filters, and supports testing according to ISO 11155-1, DIN 71460-1, ISO 5011, and ISO 16890. Various versions of the system can be configured to conform to additional international and national standards. Its flexible design allows the use of multiple aerosol types, including SAE dust, NaCl/KCl salts, and DEHS liquid aerosols, to simulate real-world operating conditions and verify filter performance under load.
Standards Compliance
(1) ISO 11155-1: Road vehicles — Air filters for occupants’ compartments — Part 1: particulate filtration test
(2) DIN 71460-1: Road vehicles — Air filters for passenger compartments — Part 1: particulate matter filtration tests
(3) ISO 5011: Air filters for internal combustion engines — Performance testing
(4) ISO 16890: Air filters for general ventilation — Particulate matter efficiency testing
Product Features
(1) Simultaneous measurement of particles in feed gas and clean gas.
(2) Particle size measurement range from 0.2 to 40 µm.
(3) Maximum particle concentration up to 10⁶ particles/cm³ (undiluted).
(4) High repeatability and internationally comparable results.
(5) Compatible with various test aerosols such as SAE coarse powder, NaCl/KCl, and DEHS.
(6) Capable of measuring fraction separation efficiency for load testing with high raw gas concentrations (>1000 mg/m³ ISO Fine, >5000 mg/m³ ISO Coarse).
(7) Flexible filter testing software (FTControl) for automated testing, data collection, and analysis.
(8) Easy operation for trained or untrained personnel, with short setup time.
(9) Mobile setup on casters for convenient relocation.
(10) Low maintenance and reliable operation, reducing overall operating costs.
(11) Verifies the functionality of individual components and the complete system during pre-delivery acceptance and commissioning.
Technical Parameters
| Parameter | Unit | Value |
|---|---|---|
| Measurement range (dimensions) | nm | 10 – 800 (U-SMPS 2050) |
| Volume flow rate | m³/h | 0.48 – 5.76 (pressurized operation) |
| Power supply | V, Hz | 115/230 V, 50/60 Hz |
| External dimensions | mm | 600 × 1800 × 900 (W×H×D) |
| Inflow velocity | cm/s | 1.3 – 16 (other specifications available) |
| Differential pressure measurement | Pa | 0 – 2,500 (others available upon request) |
| Media testing area | cm² | 100 |
| Aerosol type | – | Dust (SAE), Salt (NaCl/KCl), Liquid aerosols (DEHS) |
| Compressed air supply | bar | 6 – 8 |
在线联系供应商
Other supplier products
 |
Oil mist separation efficiency test bench | Quality assurance and the development of filters/separators/collectors should ideally be conducted under test conditions relevant to the actual con... |
 |
Syringe slide performance tester | The Syringe Slide Performance Tester is a specialized instrument designed to measure the push and pull forces of syringe plungers, ensuring smooth ... |
 |
Textile Flatness Tester | The Textile Flatness Tester is a precision instrument designed to evaluate fabric surface evenness by quantifying thickness variations, weave irreg... |
 |
Double Pendulum Digital Tear Tester | The double pendulum digital tear tester is mainly used to measure the ability of various fabrics (such as clothing fabrics, home textile fabrics, e... |
 |
Fabric Negative-ion Concentration Tester | Standard GB/T 30128-2013: Textiles – Test and Evaluation of Negative Ion Generation Application Functional Textile R&D: Assesses air-p... |
Same products
 |
Air Intake Filter Test System | 卖方: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | 卖方: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | 卖方: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | 卖方: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
