Surface Flame Spread Test Apparatus，ASTM E162 Flame propagation test apparatus

The Surface Flame Spread Test Apparatus is a high-precision instrument designed for evaluating the lateral flame propagation of materials. It is primarily used in compliance with BS 6853 series railway fire safety standards and BS 476-7 for building materials. This apparatus enables you to determine flame spread ratings based on flame extension length and propagation speed. With an advanced water-cooled sample holder, calibrated radiation panel, and digital flux sensors, you can perform controlled laboratory tests on wall, ceiling, and surface materials to ensure compliance with international fire safety regulations.

Application

The Surface Flame Spread Test Apparatus is suitable for a wide range of applications:

Building Materials Testing: Evaluate flame spread on wall and ceiling surfaces according to BS 476-7.

Railway Vehicle Materials: Conduct fire resistance and smoke toxicity evaluations in accordance with BS 6853.

Interior Materials: Assess flame spread for plastics, composites, and surface coatings using ISO 5658-1/2 and ASTM E162 standards.

Laboratory Research: Determine critical heat flux, lateral flame extension, and flame propagation characteristics under controlled conditions.

Recommended test products include wall panels, ceiling boards, interior panels, decorative laminates, plastics, and other surface materials used in public or transport environments.

Standards

The apparatus supports compliance with the following international standards:

GB/T 8624‑2012 – Classification of combustion performance of building materials

GB/T 27904‑2011 – Flame spread performance test methods for interior decoration materials

GB/T 2406.2‑2009 – Plastics burning performance test, vertical burning method

GB/T 2408‑2008 – Plastics burning performance test, horizontal burning method

ISO 5658‑1 – Fire spread index of building materials, small flame spread test, Part 1

ISO 5658‑2 – Fire spread index of building materials, small flame spread test, Part 2

ISO 5660‑2 – Heat release rate, smoke production, and mass loss, Part 2: Flame spread test method

ISO 5660‑4 – Heat release rate, smoke production, and mass loss, Part 4: Automotive interior materials

ASTM E162 – Surface flammability characteristics of materials (Flame Spread Index, FSI)

ASTM E648 – Assessment of carpet material flame spread

UL 94 – Plastic material flammability testing (Vertical and Horizontal Burning)

BS 476‑6:1989 + A1:2009 – Fire tests on building materials, Part 6: Small flame spread test

BS 6853:1999 – Railway vehicle material flame spread, smoke density, and toxicity evaluation

Parameters

Parameter Category	Details
Dimensions	1760 × 1450 × 2130 mm
Weight	678 kg
Radiation Panel	850 × 850 mm
Power Supply	220V, 50Hz, 10A
Operating Temp	10°C – 35°C
Gas Requirements	Industrial propane, compressed air

Features

Large Radiation Panel: 850 × 850 mm with reinforced structural support.

Vertical Sample Holder: Includes standard scale markings to measure flame spread distance and critical heat flux.

Water-Cooled System: Prevents sample holder damage during long-duration high-temperature testing.

Small Flame Ignition: Uses electric spark ignition for consistent flame application.

Automatic Safety Cut-Off: High-temperature sensors shut off gas supply if the radiation panel extinguishes.

Calibrated Heat Flux Sensors: Traceable to NIST for accurate radiation flux measurement.

Digital Control Box: Allows adjustment of gas and air flow with digital display of radiation flux.

PLC & HMI Integration: Displays all test parameters for real-time monitoring and control.

Accessories

Water-cooled sample holder

Calibrated porous panel

Heat flux sensors

Electric spark ignition system

PLC & HMI control system

Gas and air flow regulation valves

Safety interlock devices

Test Procedures

Ensure a minimum of 5 meters of clear space around the installation area.

Connect the apparatus to 220V, 50Hz, 10A power supply.

Supply industrial propane and compressed air to the system.

Mount the test sample vertically on the water-cooled holder.

Adjust the radiation panel and calibrate heat flux sensors.

Ignite the sample using the small flame ignition system.

Monitor flame spread distance and propagation speed using the scale markings and digital sensors.

Record data for critical heat flux and flame spread classification.

After testing, shut off gas and air supply and allow the apparatus to cool before sample removal.

Maintenance Information

Regularly inspect and clean the radiation panel and water-cooled holder.

Check gas and air supply lines for leaks before each test.

Calibrate heat flux sensors periodically to maintain traceability.

Inspect electrical connections and PLC/HMI for operational stability.

Replace worn or damaged safety interlocks immediately.

Другие товары поставщика

	Resistance to flame propagation tester,ECE R118 Annex 10	Introduction This equipment is designed and manufactured according to ECE R118 Annex 10. This model is intelligent, with PLC and touch screen in...
	Molten Metal Penetration Resistance Tester	Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra...
	High-Speed Reciprocating Friction and Wear Tester (Type 02)	The High-Speed Reciprocating Friction and Wear Tester (Type 02) is designed to evaluate the friction and wear performance of materials and surface ...
	Desert Wind Sand and Dust Environmental Test Chamber	Whats/App: +86 156 1874 6768 Web: standard-groups.com Photovoltaic Module Dust and Sand Blowing Test Chamber is an environmental reliability test...
	Office Chair Caster Durability meter	Implementation standards GB/T4085 EN425 Product features 1. The instrument adopts PLC touch screen control, simple and intuitive operation; 2. ...

Все товары поставщика

Похожие товары

	Damp Freeze and Thermal Cycling Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ...
	Alternative to BBA steady state solar simulator tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S...
	Alternative to PV Hail Impact Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine...
	Solar Panel Insulation Resistance Test Chamber	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ...
	90-Degree Peel Tester for PV Backsheets	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e...