Surface Flame Spread Test Apparatus，ASTM E162 Flame propagation test apparatus
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Surface Flame Spread Test Apparatus is a high-precision instrument designed for evaluating the lateral flame propagation of materials. It is primarily used in compliance with BS 6853 series railway fire safety standards and BS 476-7 for building materials. This apparatus enables you to determine flame spread ratings based on flame extension length and propagation speed. With an advanced water-cooled sample holder, calibrated radiation panel, and digital flux sensors, you can perform controlled laboratory tests on wall, ceiling, and surface materials to ensure compliance with international fire safety regulations.
Application
The Surface Flame Spread Test Apparatus is suitable for a wide range of applications:
Building Materials Testing: Evaluate flame spread on wall and ceiling surfaces according to BS 476-7.
Railway Vehicle Materials: Conduct fire resistance and smoke toxicity evaluations in accordance with BS 6853.
Interior Materials: Assess flame spread for plastics, composites, and surface coatings using ISO 5658-1/2 and ASTM E162 standards.
Laboratory Research: Determine critical heat flux, lateral flame extension, and flame propagation characteristics under controlled conditions.
Recommended test products include wall panels, ceiling boards, interior panels, decorative laminates, plastics, and other surface materials used in public or transport environments.
Standards
The apparatus supports compliance with the following international standards:
GB/T 8624‑2012 – Classification of combustion performance of building materials
GB/T 27904‑2011 – Flame spread performance test methods for interior decoration materials
GB/T 2406.2‑2009 – Plastics burning performance test, vertical burning method
GB/T 2408‑2008 – Plastics burning performance test, horizontal burning method
ISO 5658‑1 – Fire spread index of building materials, small flame spread test, Part 1
ISO 5658‑2 – Fire spread index of building materials, small flame spread test, Part 2
ISO 5660‑2 – Heat release rate, smoke production, and mass loss, Part 2: Flame spread test method
ISO 5660‑4 – Heat release rate, smoke production, and mass loss, Part 4: Automotive interior materials
ASTM E162 – Surface flammability characteristics of materials (Flame Spread Index, FSI)
ASTM E648 – Assessment of carpet material flame spread
UL 94 – Plastic material flammability testing (Vertical and Horizontal Burning)
BS 476‑6:1989 + A1:2009 – Fire tests on building materials, Part 6: Small flame spread test
BS 6853:1999 – Railway vehicle material flame spread, smoke density, and toxicity evaluation
Parameters
| Parameter Category | Details |
|---|---|
| Dimensions | 1760 × 1450 × 2130 mm |
| Weight | 678 kg |
| Radiation Panel | 850 × 850 mm |
| Power Supply | 220V, 50Hz, 10A |
| Operating Temp | 10°C – 35°C |
| Gas Requirements | Industrial propane, compressed air |
Features
Large Radiation Panel: 850 × 850 mm with reinforced structural support.
Vertical Sample Holder: Includes standard scale markings to measure flame spread distance and critical heat flux.
Water-Cooled System: Prevents sample holder damage during long-duration high-temperature testing.
Small Flame Ignition: Uses electric spark ignition for consistent flame application.
Automatic Safety Cut-Off: High-temperature sensors shut off gas supply if the radiation panel extinguishes.
Calibrated Heat Flux Sensors: Traceable to NIST for accurate radiation flux measurement.
Digital Control Box: Allows adjustment of gas and air flow with digital display of radiation flux.
PLC & HMI Integration: Displays all test parameters for real-time monitoring and control.
Accessories
Water-cooled sample holder
Calibrated porous panel
Heat flux sensors
Electric spark ignition system
PLC & HMI control system
Gas and air flow regulation valves
Safety interlock devices
Test Procedures
Ensure a minimum of 5 meters of clear space around the installation area.
Connect the apparatus to 220V, 50Hz, 10A power supply.
Supply industrial propane and compressed air to the system.
Mount the test sample vertically on the water-cooled holder.
Adjust the radiation panel and calibrate heat flux sensors.
Ignite the sample using the small flame ignition system.
Monitor flame spread distance and propagation speed using the scale markings and digital sensors.
Record data for critical heat flux and flame spread classification.
After testing, shut off gas and air supply and allow the apparatus to cool before sample removal.
Maintenance Information
Regularly inspect and clean the radiation panel and water-cooled holder.
Check gas and air supply lines for leaks before each test.
Calibrate heat flux sensors periodically to maintain traceability.
Inspect electrical connections and PLC/HMI for operational stability.
Replace worn or damaged safety interlocks immediately.
在线联系供应商
Other supplier products
 |
Bending deformation suture needle instrument | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY/T 0043 :Medical Suture Needles YY/T 0166 :Surgical Suture Needles with Threa... |
 |
Spontaneous Combustion Tester for Solids | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description Conforms to the UN Recommendations on the Transport of Dangerous Goods... |
 |
Minimum ignition point test machine,Automated dust cloud ignition tester,IEC 61241 | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction This machineis a way of testing the sensitivity of the ignition that the dust... |
 |
CE Certified Rotary Tribometer Supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Rotary Tribometer is a multifunctional friction and wear testing instrume... |
 |
Automotive Interior Burning Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction The Automotive Interior Burning Tester is designed according to ISO37... |
Same products
 |
ER4047 Aluminum Mig Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
