Automated Filter Element Test System，ISO 29463 automated filter media test apparatus

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Test System for production control of filter elements (e.g. exhaust filter, HEPA filter)

For the purpose of 100% inspection of the integral filter separation efficiency during production, especially for exhaust filters and HEPA filters used in vacuum cleaners and mobile air cleaners.

Production control demands for short test cycles while using robust, compact, service-reduced and safe technologies. A test cycle includes therefore the supply, the analytical characterisation and the re-moval of the test specimen. Due to its measurement concept and high degree of automatisation, the system enables reliable testing with measurement times of 30 s.

To ensure a full traceability, determined test data can be integrated directly into in-house databases by combining the filter test system with techniques for test specimen identification (e.g., bar code or QR code scanner).

Applications

production control of integral separation efficiency of exhaust particle filters (GPF, DPF)

quality control of HEPA filters or filter cartridges of e.g. industrial vacuum systems

research and development on any small air filter elements

Standards

This system meets the requirements of:

(1) GB/T 14295-2019 – Air filters.

(2) GB/T 13554-2020 – High-efficiency air filters.

(3) GB/T 6165-2021 – HEPA filter performance testing: efficiency and resistance.

(4) ISO 29463-4 – High-efficiency air filter performance.

(5) ISO 16890 – Air filter performance standard.

(6) EN 1822 – HEPA and ULPA filter performance testing.

(7) ISO 5011 – Engine air intake filter testing.

Principle

A defined volumetric flow rate is sucked by a controlled blower from the environment through a HEPA inlet filter, the test duct and a safety filter. The test duct is composed of three functional sections, i.e., sections for i) the generation and characterisation of the test aerosol (upstream aerosol), ii) the incorporation of the test specimen (specimen adapter) and iii) the characterisation of the downstream aerosol.

Technical data

Parameter	Unit	Value
Test flow rate	m³/h	40 … 440 (up to 1200 optional)
Measuring range, particle size (OPC)	µm	0.1 … 1.0
Measuring range, particle size (CPC)	µm	0.001 … 1.0
Test cycle duration	s	approx. 30
Test aerosol	–	Customer-specific (e.g., DEHS or others)
Dimensions of test specimen	–	Diameter ≤ 300 mm; Length ≤ 850 mm
Compressed air supply	bar	4.0 … 6.0
Power supply	–	3 × 400 VAC, hard-wired; rated current 30 A; pre-fuse 32 A
Inner diameter of duct	mm	150
Aerosol-analytical instruments	–	Customer-specific (e.g., OPC, CPC, etc.)
Integrated sensors	–	Temperature, relative humidity, air pressure
Dimensions (W × H × D)	mm	2800 × 2100 × 1200
Weight	kg	approx. 800

Features

24/7 Operation: Automated safety features for continuous production.

Short Test Cycle: Complete aerosol supply, analysis, and sample removal within ~30 seconds.

Flexible Quality Standards: Adjustable separation efficiency and pressure drop thresholds.

Minimal Sample Load: Reduces stress on test samples, extending product life.

High Automation and Efficiency: Minimizes operator intervention, improves throughput.

Full Traceability: Barcode/QR code integration ensures complete production tracking.

Benefits

test system designed for 24/7 operation with automated safety functions

short test cycles (supply, analysis, removal) for separation efficiency and pressure drop

quality criteria for separation efficiency and pressure drop are freely configurable

minimal loading of test specimen (higher lifetime of products)

Accessories

Accessory	Quantity
Aerosol Particle Spectrometer	1
Custom Filter Adapter	1
Test System Software	1

Operation Instructions

System Startup:

- Ensure all devices are operational (aerosol generator, particle counters, fans).

- Calibrate aerosol measurement instruments and configure test parameters.

Testing Process:

- Start the test; the system automatically generates aerosol and measures separation efficiency and pressure drop.

Data Recording and Reporting:

- The system software generates and stores test reports, including separation efficiency, pressure drop, and relevant quality data.

Experimental Procedure

Preparation Stage:

- Verify all instruments and devices are ready and calibrated.

- Install the filter element in the custom adapter and confirm settings.

Testing Stage:

- Automated measurement of aerosol concentration, particle filtration efficiency, and pressure drop occurs.

Result Analysis and Reporting:

- Reports are automatically generated, including key metrics and compliance with production quality standards.

Maintenance Information

Regularly check aerosol generators, particle counters, and sensors.

Ensure software and database connections are functioning properly.

Maintain clean ducts and adapters to guarantee measurement accuracy.

Другие товары поставщика

	Pipe drop hammer impact testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction 1. Name: drop hammer impact testing machine 2. Model :G-1 3. Produc...
	Fabric Fiber Shedding Degree Tester (Friction)	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Fabric Fiber Shedding Degree Tester (Friction) is an instrument used to evaluate the li...
	Furniture flammability tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Furniture flammability tester is mainly used to test the combustion performance of mattress...
	ISO Abrasion Resistance Tester Equipment	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The instrument can be used to flat grinding, mill grinding, edge grinding, fo...
	Automotive Cable Cut Through Resistance Tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Wire Cut-Through Tester is designed to evaluate the resistance...

Все товары поставщика

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...