Industrial racing seat headrest impact tester supplier

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The machine complies with international and national standards for automotive seat and occupant protection testing, including:

GB 15083‑2019 – Automotive seats, seat anchors, and headrest strength requirements and test methods

ISO/TS 16925:2014‑06 – General testing technical specification for seats and occupant restraint devices

FMVSS 202a – U.S. motor vehicle safety standard for head restraint performance

FMVSS 201 – U.S. motor vehicle safety standard for occupant impact protection

FMVSS 208 – U.S. motor vehicle safety standard for occupant protection performance

Parameters

Parameter	Details
Impact Acceleration Range	200 g
Impact Velocity	24.1 km/h
Velocity Accuracy	±2.5% (or ±0.5 km/h)
Sampling Frequency	250 kSP/s
Pendulum Length	1250 mm
Pendulum Elevation Resolution	0.1°
Acceleration Accuracy	±5%
Impact Hammer Effective Mass	6.8 kg ±0.05 kg
Main Test Bench Dimensions	3000 × 2000 × 4100 mm
Computer Console Dimensions	600 × 600 × 1500 mm
Power Supply	Single-phase AC 220V, 50Hz, 1 kW; Three-phase AC 380V, 50Hz, 3 kW

Features

Pendulum-based impact testing for precise simulation of front and rear collisions.

Computer interface uses virtual instrument panel technology for intuitive operation.

Test data is reproducible with highlighted key points for easy analysis.

Data is stored in a database, allowing efficient retrieval and review.

Pendulum swing angle adjustable from 0° to 172° for versatile impact testing.

Equipped with safety protective net to ensure operator safety during testing.

Accessories

Data acquisition modules

Pendulum calibration tools

Protective net and support frame

Clamping and fixture devices for headrests and seats

Computer console with software license

Test Procedures

Secure the racing seat and headrest assembly onto the test bench.

Configure impact parameters including velocity, pendulum angle, and sampling frequency via the computer console.

Verify all safety measures, including protective nets, are in place.

Initiate the impact test; pendulum strikes the headrest or restraint system.

Monitor real-time data on acceleration, velocity, and force.

After testing, retrieve the data from the database for analysis.

Inspect the tested component for deformation or failure.

Maintenance Information

Periodically inspect pendulum and pivot points for wear or alignment issues.

Verify and calibrate the impact hammer and data acquisition system regularly.

Ensure the safety protective net and support frame are intact.

Check computer software and database for integrity and proper operation.

Keep the test area clean and free of debris that may affect pendulum movement.

Другие товары поставщика

	In-situ expansion analysis system	Whats/App: +86 156 1874 6768 Web: standard-groups.com The In-situ Expansion Analysis System is designed for high-precision measurement of dimensi...
	Safety Helmets Acceleration Impact & Penetration Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6...
	Bundesmann Rain Tester | ISO 9865 Waterproof Fabric Testing Machine Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Rainfall portion consists of 300 identical drips for uniform pr...
	Load-controlled friction and wear testing machine manufacturer	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Friction and wear characterization of metallic materials Tribological perform...
	Hypodermic needle toughness tester instrument	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The device meets and supports testing according to the following international a...

Все товары поставщика

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...