Industrial racing seat headrest impact tester supplier
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The machine complies with international and national standards for automotive seat and occupant protection testing, including:
GB 15083‑2019 – Automotive seats, seat anchors, and headrest strength requirements and test methods
ISO/TS 16925:2014‑06 – General testing technical specification for seats and occupant restraint devices
FMVSS 202a – U.S. motor vehicle safety standard for head restraint performance
FMVSS 201 – U.S. motor vehicle safety standard for occupant impact protection
FMVSS 208 – U.S. motor vehicle safety standard for occupant protection performance
Parameters
| Parameter | Details |
|---|---|
| Impact Acceleration Range | 200 g |
| Impact Velocity | 24.1 km/h |
| Velocity Accuracy | ±2.5% (or ±0.5 km/h) |
| Sampling Frequency | 250 kSP/s |
| Pendulum Length | 1250 mm |
| Pendulum Elevation Resolution | 0.1° |
| Acceleration Accuracy | ±5% |
| Impact Hammer Effective Mass | 6.8 kg ±0.05 kg |
| Main Test Bench Dimensions | 3000 × 2000 × 4100 mm |
| Computer Console Dimensions | 600 × 600 × 1500 mm |
| Power Supply | Single-phase AC 220V, 50Hz, 1 kW; Three-phase AC 380V, 50Hz, 3 kW |
Features
Pendulum-based impact testing for precise simulation of front and rear collisions.
Computer interface uses virtual instrument panel technology for intuitive operation.
Test data is reproducible with highlighted key points for easy analysis.
Data is stored in a database, allowing efficient retrieval and review.
Pendulum swing angle adjustable from 0° to 172° for versatile impact testing.
Equipped with safety protective net to ensure operator safety during testing.
Accessories
Data acquisition modules
Pendulum calibration tools
Protective net and support frame
Clamping and fixture devices for headrests and seats
Computer console with software license
Test Procedures
Secure the racing seat and headrest assembly onto the test bench.
Configure impact parameters including velocity, pendulum angle, and sampling frequency via the computer console.
Verify all safety measures, including protective nets, are in place.
Initiate the impact test; pendulum strikes the headrest or restraint system.
Monitor real-time data on acceleration, velocity, and force.
After testing, retrieve the data from the database for analysis.
Inspect the tested component for deformation or failure.
Maintenance Information
Periodically inspect pendulum and pivot points for wear or alignment issues.
Verify and calibrate the impact hammer and data acquisition system regularly.
Ensure the safety protective net and support frame are intact.
Check computer software and database for integrity and proper operation.
Keep the test area clean and free of debris that may affect pendulum movement.
在线联系供应商
Other supplier products
 |
Walk In Salt Spray Test Chamber ISO 9227 Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GMW 14872 Simulating the Corrosion Resistance of Automotive Compon... |
 |
UV Test Chamber丨UV Testing Mechine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1. STD UV-SI-260 is widely used in UV aging test, which can realiz... |
 |
Luggage lifting and unloading testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The luggage simulation lifting and unloading tester is a measuring instrument for the life ... |
 |
Anthropomorphic test dummies | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards EN standard (Euro-American sign) GB standard (Chinese/Asian sign) Features Th... |
 |
Fully Automatic Falling Sand Abrasion Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.comv The Fully Automatic Falling Sand Abrasion Tester is designed to evaluate the wear resistan... |
Same products
 |
不锈钢焊剂芯焊丝 E308T1-1 E308HT1-1 E308LT1-1 用于304不锈钢焊接的气保焊丝 | 卖方: 863048 | 产品描述 不锈钢药芯焊丝 E308T1-1 E308HT1-1 E308LT1-1，FCAW不锈钢焊丝，AWS A5.22药芯焊丝，304不锈钢焊接耗材，低碳不锈钢药芯焊丝，耐高温不锈钢焊丝，... |
 |
E317LT1-1 焊剂芯线 CO2 不锈钢焊剂含量70% 直径1.0/1.2/1.6mm OEM定制 1200℃熔点 | 卖方: 863048 | 迅卓不锈钢药心焊丝 E317LT1-1 分类： Сварочная проволока E317LT1-1 с флюсом, нержавеющая сталь, 70% содержан... |
 |
Mini Jewelry Laser Repair System – 60W to 400W Precision Welding | 卖方: Beijing JCZ Technology Co., Ltd | The Mini Jewelry Laser Welding Machineis an advanced mini laser welding system engineered for pre... |
 |
Portable Backpack Laser Cleaning Machine – Lightweight, Efficient Rust & Paint Removal | 卖方: Beijing JCZ Technology Co., Ltd | TheHCP-M SeriesBackpack Laser Cleaning Machinefeatures a compact pulsed fiber laser system, desig... |
 |
Suitcase Pulsed Laser Cleaning Machine | Ultra-Portable Handheld Fiber Laser Cleaner | 卖方: Beijing JCZ Technology Co., Ltd | The Suitcase Pulsed Laser Cleaning Machineis an ultra-portable, high-precision handheld fiber las... |
