Industrial racing seat headrest impact tester supplier
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The machine complies with international and national standards for automotive seat and occupant protection testing, including:
GB 15083‑2019 – Automotive seats, seat anchors, and headrest strength requirements and test methods
ISO/TS 16925:2014‑06 – General testing technical specification for seats and occupant restraint devices
FMVSS 202a – U.S. motor vehicle safety standard for head restraint performance
FMVSS 201 – U.S. motor vehicle safety standard for occupant impact protection
FMVSS 208 – U.S. motor vehicle safety standard for occupant protection performance
Parameters
| Parameter | Details |
|---|---|
| Impact Acceleration Range | 200 g |
| Impact Velocity | 24.1 km/h |
| Velocity Accuracy | ±2.5% (or ±0.5 km/h) |
| Sampling Frequency | 250 kSP/s |
| Pendulum Length | 1250 mm |
| Pendulum Elevation Resolution | 0.1° |
| Acceleration Accuracy | ±5% |
| Impact Hammer Effective Mass | 6.8 kg ±0.05 kg |
| Main Test Bench Dimensions | 3000 × 2000 × 4100 mm |
| Computer Console Dimensions | 600 × 600 × 1500 mm |
| Power Supply | Single-phase AC 220V, 50Hz, 1 kW; Three-phase AC 380V, 50Hz, 3 kW |
Features
Pendulum-based impact testing for precise simulation of front and rear collisions.
Computer interface uses virtual instrument panel technology for intuitive operation.
Test data is reproducible with highlighted key points for easy analysis.
Data is stored in a database, allowing efficient retrieval and review.
Pendulum swing angle adjustable from 0° to 172° for versatile impact testing.
Equipped with safety protective net to ensure operator safety during testing.
Accessories
Data acquisition modules
Pendulum calibration tools
Protective net and support frame
Clamping and fixture devices for headrests and seats
Computer console with software license
Test Procedures
Secure the racing seat and headrest assembly onto the test bench.
Configure impact parameters including velocity, pendulum angle, and sampling frequency via the computer console.
Verify all safety measures, including protective nets, are in place.
Initiate the impact test; pendulum strikes the headrest or restraint system.
Monitor real-time data on acceleration, velocity, and force.
After testing, retrieve the data from the database for analysis.
Inspect the tested component for deformation or failure.
Maintenance Information
Periodically inspect pendulum and pivot points for wear or alignment issues.
Verify and calibrate the impact hammer and data acquisition system regularly.
Ensure the safety protective net and support frame are intact.
Check computer software and database for integrity and proper operation.
Keep the test area clean and free of debris that may affect pendulum movement.
Send product request
Other supplier products
 |
Safety Helmet Lateral Rigidity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Safety Helmet Lateral Rigidity Tester is a precision instrument designed to evaluate th... |
 |
NES 713 Navy Engineering Smoke Toxicity Test Chamber，Ftir and Nbs Smoke Toxicity Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com The NES 713 Navy Engineering Smoke Toxicity Test Chamber is a specialized fire testing inst... |
 |
EN 1822-3 HEPA and ULPA filter testing System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application (1) Small HEPA Filter Element Efficiency Testing: Verification of overall effi... |
 |
Liquid Spontaneous ignition point tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temp... |
 |
Full Face Masks Flame Resistance Test Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction Fireman fire-protective clothing is mainly composed of jacket and bibcompos... |
