Coating scratch test equipment for durability testing

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

(1) GB 4706.1-2005 Safety of household and similar electrical appliances – Part 1: General requirements, Clause 21.2

(2) GB 4943.1-2011 Information technology equipment – Safety – Part 1: General requirements, Clause 2.10.8.4

(3) IEC 60335-1:2004 Household and similar electrical appliances – Safety – Part 1: General requirements, Clause 21.2

(4) IEC 60950-1:2005 Information technology equipment – Safety – Part 1: General requirements, Clause 2.10.8.4

Parameters

Parameter	Specification
Power supply	220 V AC, 50 Hz
Test station	Single station
Control system	PLC control, 7-inch color touch screen, stepper motor drive
Stylus tip radius	R0.25 ± 0.02 mm
Stylus apex angle	40°
Scratch speed	20 ± 5 mm/s (presettable)
Scratch force	10 ± 0.5 N
Scratch spacing	0–50 mm (presettable)
Scratch angle	80–85° (fixture fixed)
Specimen tray	Rotatable by 90°, multiple mounting holes

Features

Standard-compliant stylus geometry with polished rounded tip.

Precise motion control using stepper motors and programmable parameters.

Stable load application to maintain constant 10 N test force.

90° rotatable specimen tray suitable for different sample sizes and orientations.

Flexible starting-point selection (center-based or arbitrary positioning).

Automatic cycle operation with return-to-origin function after completion.

Accessories

(1) Scratch stylus × 1

(2) Hex key set × 1

(3) Specimen pressure plates × 4

Test Procedures

1. Specimen installation

Center the specimen on the test platform.

For large samples, secure using clamping plates.

For thin samples (< 2 mm), place the flat side of the pressure plate directly on the specimen.

2. Parameter setting

Start point selection (choose one method):

Center mode: Scratches are symmetrical about the rotary center.

Arbitrary start point: Manually move the stylus to the desired position and confirm as the start point.

Vertical position setting:

Lower the stylus manually until it is lifted by the specimen surface.

Record this position and input it as the “downward position” in the control interface.

Motion parameters:

Preset vertical, horizontal, and forward speeds (horizontal speed: 20 ± 5 mm/s).

Set scratch length ensuring that after 90° rotation the scratches remain within the specimen and do not intersect.

Set scratch spacing (minimum 5 mm between lines and 5 mm from specimen edge).

Set number of scratches and select 90° rotation if required.

3. Test operation sequence

Press Return to Origin, then Start.

The stylus moves: Origin → selected start point → descends to test position → performs scratch → lifts → returns to start point → advances spacing → repeats cycle → stops automatically and returns to origin.

Другие товары поставщика

	Mask Bacterial Filtration Efficiency Test Machine (BFE)	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY0469-2004. YY/T 0969-2013. ASTMF2100. ASTMF2101. EN14683 ect. Features ...
	Falling ball impact testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Falling ball impact tester is suitable for testing the fastness of p...
	Automated HEPA/ULPA Filter Scanning Test System，High-efficiency filter scanning test bench	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automated HEPA/ULPA Filter Scanning Test System is designed for automated testing of hi...
	Fireproof coatings tester chamber method	Whats/App: +86 156 1874 6768 Web: standard-groups.com The fire-retardant coating tester (combustion chamber method) is primarily used to test the...
	Battery impact tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Battery Impact Tester is designed for safety performance evaluation of lithium-ion cell...

Все товары поставщика

Похожие товары

	MMA-120 Handheld Arc Welder	Продавец: 871183	The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con...
	SHX Series Circulating Fluidized Bed Steam Boiler	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi...
	YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ...
	DHL Series Coal-Fired Steam Boilers	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b...
	SZL Series Biomass Steam Boiler	Продавец: Hebei Genjux Boiler Co.,Ltd	Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi...