Coating scratch test equipment for durability testing

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

(1) GB 4706.1-2005 Safety of household and similar electrical appliances – Part 1: General requirements, Clause 21.2

(2) GB 4943.1-2011 Information technology equipment – Safety – Part 1: General requirements, Clause 2.10.8.4

(3) IEC 60335-1:2004 Household and similar electrical appliances – Safety – Part 1: General requirements, Clause 21.2

(4) IEC 60950-1:2005 Information technology equipment – Safety – Part 1: General requirements, Clause 2.10.8.4

Parameters

Parameter	Specification
Power supply	220 V AC, 50 Hz
Test station	Single station
Control system	PLC control, 7-inch color touch screen, stepper motor drive
Stylus tip radius	R0.25 ± 0.02 mm
Stylus apex angle	40°
Scratch speed	20 ± 5 mm/s (presettable)
Scratch force	10 ± 0.5 N
Scratch spacing	0–50 mm (presettable)
Scratch angle	80–85° (fixture fixed)
Specimen tray	Rotatable by 90°, multiple mounting holes

Features

Standard-compliant stylus geometry with polished rounded tip.

Precise motion control using stepper motors and programmable parameters.

Stable load application to maintain constant 10 N test force.

90° rotatable specimen tray suitable for different sample sizes and orientations.

Flexible starting-point selection (center-based or arbitrary positioning).

Automatic cycle operation with return-to-origin function after completion.

Accessories

(1) Scratch stylus × 1

(2) Hex key set × 1

(3) Specimen pressure plates × 4

Test Procedures

1. Specimen installation

Center the specimen on the test platform.

For large samples, secure using clamping plates.

For thin samples (< 2 mm), place the flat side of the pressure plate directly on the specimen.

2. Parameter setting

Start point selection (choose one method):

Center mode: Scratches are symmetrical about the rotary center.

Arbitrary start point: Manually move the stylus to the desired position and confirm as the start point.

Vertical position setting:

Lower the stylus manually until it is lifted by the specimen surface.

Record this position and input it as the “downward position” in the control interface.

Motion parameters:

Preset vertical, horizontal, and forward speeds (horizontal speed: 20 ± 5 mm/s).

Set scratch length ensuring that after 90° rotation the scratches remain within the specimen and do not intersect.

Set scratch spacing (minimum 5 mm between lines and 5 mm from specimen edge).

Set number of scratches and select 90° rotation if required.

3. Test operation sequence

Press Return to Origin, then Start.

The stylus moves: Origin → selected start point → descends to test position → performs scratch → lifts → returns to start point → advances spacing → repeats cycle → stops automatically and returns to origin.

Other supplier products

	High-Low Temperature Gravel Impact Tester，Stone Chip Resistance Gravelometer	Whats/App: +86 156 1874 6768 Web: standard-groups.com High-Low Temperature Multifunctional Aggregate Impact Tester is a professional testing inst...
	Rolling load tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com A common requirement for different types of indoor sports surfaces is the measurement of ro...
	Textile Fiber Composition Analyzer	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Textile Fiber Composition Analyzer is an intelligent laboratory testing system designed...
	Air flow drying rate test equipment supplier	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Airflow Method Fabric Drying Rate Tester is an automated precision instru...
	Xenon Arc Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Features and Benefits 1. A variety of filters are available. For example, daylight filte...

供应产品

Same products

	HDPE高速水冷双壁波纹管生产线	卖方: Shandong HUASU Plastic Technology Co.,Ltd.	机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功...
	PanEVAP & MVR system	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...