Diesel High Frequency Reciprocating Rig
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The tester complies with or supports test methods defined in the following standards:
ASTM D6079 (Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig)
GB/T 35137-2025 (Diesel fuel lubricity evaluation)
SH/T 0765 (Diesel fuel lubricity evaluation method)
ASTM D7688 (Standard Test Method for Evaluating Lubricity of Diesel Fuels)
ISO 12156-1 (Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig — Part 1: Test method)
CEC F-06-A-96 (Method for evaluating the lubricating performance of diesel fuel)
BS EN 590 (Automotive fuels — Diesel — Requirements and test methods)
JPI-5S-50-98 (Test method for evaluating diesel fuel lubricity)
Parameters
| Item | Description |
|---|---|
| Load Control | Real-time normal load control |
| Frequency Range | 1–200 Hz |
| Stroke Length | 10 µm to 2.8 mm |
| Friction Force Measurement | High-precision piezoelectric ceramic sensor |
| Temperature Range | Ambient to 180 °C; optional low-temperature and high-temperature up to 400 °C |
| Maximum Load | Up to 20 N (other load ranges available) |
Features
Standardized high-frequency reciprocating motion for lubricity evaluation
Fully automated, computer-controlled test system
Programmable test parameters for flexible testing conditions
Real-time friction force measurement using piezoelectric ceramic sensors
High repeatability and reliable calibration procedure
Supports standard reference oils and test samples
Optional expansion modules for advanced analysis and extended applications
Accessories
Standard test specimen and reference oil set
Piezoelectric ceramic friction force sensor
Electrical contact resistance measurement module (optional)
Metallographic microscope for wear scar analysis (optional)
Gasoline lubricity test module (optional)
Test Procedures
Install the standard test specimen and select the appropriate test configuration.
Set test parameters such as load, frequency, stroke length, and temperature.
Calibrate the system according to the standard procedure using reference oil.
Start the automated test sequence under computer control.
Measure friction force in real time throughout the test.
Complete the test after the specified duration or cycle count.
Evaluate lubricity performance based on test results and wear scar analysis.
Maintenance Information
Clean test specimens and contact components after each test.
Regularly verify calibration using standard reference oils.
Inspect sensors and mechanical components periodically for stable performance.
Maintain temperature control and motion systems according to operating conditions.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Shoelace wear tester丨Shoelace wear test mechine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Main uses: Shoelace wear tester is mainly used to evaluate the durability and wear resista... |
 |
E-bike chassis dynamometer testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Electric bicycles are complex systems involving mechanical, electrical, and control compone... |
 |
Automotive Shock Absorber Jounce and Rebound Test Machine | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Single Station Jounce Tester is designed for vibration durability testing... |
 |
ASTM D2843 smoke density tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use the F313 Plastic Smoke Density Tester in the following areas: Pla... |
 |
Adiabatic Accelerated Calorimeter | Whats/App: +86 156 1874 6768 Web: standard-groups.com An Accelerating Rate Calorimeter (ARC) is a high-precision thermal analysis instrument that... |
