Building Material Flammability Test Furnace | ASTM ISO Testing Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The touch screen-controlled building materials flammability test furnace, upgraded from old JCK-2. features stainless steel casing, automatic sample lifting, and adjustable Bunsen lamp. It complies with GB8626-2007 and uses the German KLEINBRENNER principle to test Class B building materials' flammability by vertically impacting them with a small flame.
Standards
EN ISO11925-2:2002E :"Test Method for Flammability of Building Materials"
GB/T8626-2007 :"Combustibility test Method for Building Materials"
Parameters
| Stainless steel plate box | 1.5mm |
| Bunsen burner | can be adjusted forward and backward |
| Diameter of burner | Φ 0.17mm burner with regulator; four ￠4mm air suction inlet |
| Flame length of Bunsen burner | 20mm ± 2mm |
| Ignition source | can be automatically tilted by 45 degrees |
| The Bunsen burner applies a flame time | 15s to the pattern |
| Flame height | Adjusted by precision adjustment valve |
| Sample rack | can move up and down and back and forth |
| Sample holders | 2 pcs |
| Touch screen display | 7 inches Effective display size 15.5cm in length and 8.6cm in width |
| Resolution | 800 * 480 |
| Communication interface | RS232. 3.3V CMOS or TTL, serial port mode |
| Storage capacity | 1G |
| FPGA driver display | "zero" start time, can run after power on |
| Controller | adopts low energy consumption processor, and automatically enters energy saving mode |
| Gas source | >95% propane gas;(user should provide for themselves) |
| Gas pressure | 10kpa~50kpa |
| Flue air velocity | 0.7m/s only on condition of burner burning and draught hood open |
| Time adjustment of continuous flame | 0 ~ 99minutes99seconds |
| Time adjustment of afterflame | 0 ~ 99minutes99seconds |
| Timer accuracy | ≤1s/h |
| Ambient temperature | 15 ℃ ～ 25 ℃; |
| Relative humidity | ≤ 85% |
| Cabinet size | 835 × 400 × 815mm |
| Power supply voltage and power | 220 V, 50 Hz, 100 W |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Textile Far - Infrared Radiation Heating Tester - lab instrument | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com With the continuous advancement of technology, new ... |
 |
Catheter Guidewire Friction Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Catheter Guidewire Friction Tester is designed to accurately measure the frict... |
 |
Tensile and Shear Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Tensile and Shear Tester analyzes hand movements-referred to as "tensile"and "... |
 |
Pin/Ball-on-Disc Tribometer | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Pin-on-Disc Machine is a classic tribological testing instrument designed for ... |
 |
Coated fabric flexing resistance testing machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com The instrument tests coated fabric strips by windin... |
Похожие товары
 |
Laser Cutting Machines | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
