Building Material Flammability Test Furnace | ASTM ISO Testing Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The touch screen-controlled building materials flammability test furnace, upgraded from old JCK-2. features stainless steel casing, automatic sample lifting, and adjustable Bunsen lamp. It complies with GB8626-2007 and uses the German KLEINBRENNER principle to test Class B building materials' flammability by vertically impacting them with a small flame.
Standards
EN ISO11925-2:2002E :"Test Method for Flammability of Building Materials"
GB/T8626-2007 :"Combustibility test Method for Building Materials"
Parameters
| Stainless steel plate box | 1.5mm |
| Bunsen burner | can be adjusted forward and backward |
| Diameter of burner | Φ 0.17mm burner with regulator; four ￠4mm air suction inlet |
| Flame length of Bunsen burner | 20mm ± 2mm |
| Ignition source | can be automatically tilted by 45 degrees |
| The Bunsen burner applies a flame time | 15s to the pattern |
| Flame height | Adjusted by precision adjustment valve |
| Sample rack | can move up and down and back and forth |
| Sample holders | 2 pcs |
| Touch screen display | 7 inches Effective display size 15.5cm in length and 8.6cm in width |
| Resolution | 800 * 480 |
| Communication interface | RS232. 3.3V CMOS or TTL, serial port mode |
| Storage capacity | 1G |
| FPGA driver display | "zero" start time, can run after power on |
| Controller | adopts low energy consumption processor, and automatically enters energy saving mode |
| Gas source | >95% propane gas;(user should provide for themselves) |
| Gas pressure | 10kpa~50kpa |
| Flue air velocity | 0.7m/s only on condition of burner burning and draught hood open |
| Time adjustment of continuous flame | 0 ~ 99minutes99seconds |
| Time adjustment of afterflame | 0 ~ 99minutes99seconds |
| Timer accuracy | ≤1s/h |
| Ambient temperature | 15 ℃ ～ 25 ℃; |
| Relative humidity | ≤ 85% |
| Cabinet size | 835 × 400 × 815mm |
| Power supply voltage and power | 220 V, 50 Hz, 100 W |
在线联系供应商
Other supplier products
 |
Cabin Air Filter Test System（Particle removal & Gas adsorption） | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for both particle separation and gas absorption/desorption of of air f... |
 |
GB/T 19666 Toxicity Index Tester | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The ASTM E1678 Combustion smoke toxicity tester is used for smoke toxicity testing... |
 |
Large-Scale Composite Salt Spray Test Chamber | ASTM ISO Testing Machine | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheLarge-Scale Composite Salt Spray Test Chamberis a professional environmental si... |
 |
Protective Clothing Impact Abrasion Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Protective Clothing Impact Abrasion Tester is designed to evaluate the impact ... |
 |
Helmet UV Pretreatment Box Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Helmet UV Pretreatment Box is designed to simulate ultraviolet (UV) exposure o... |
Same products
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate... |
 |
Choosing the Right Equipment for Heavy-Duty Cleaning | 卖方: Taizhou Feike Mechanical Technology Co., Ltd. | FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve... |
 |
ER4043 Silicon Aluminum Welding Wire | 卖方: 868776 | Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin... |
 |
HDPE高速水冷双壁波纹管生产线 | 卖方: Shandong HUASU Plastic Technology Co.,Ltd. | 机头模具采用双流道结构、氮化磨光处理机头，偏壁调整方便快捷，保证内外层壁厚均匀和稳定成型。 最新设计密闭压力水冷冷却结构，冷却充分，多点分布真空系统，效率更高，生产速度更快。 双层在线扩口功... |
 |
PanEVAP & MVR system | 卖方: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
