Building Material Flammability Test Furnace | ASTM ISO Testing Machine
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The touch screen-controlled building materials flammability test furnace, upgraded from old JCK-2. features stainless steel casing, automatic sample lifting, and adjustable Bunsen lamp. It complies with GB8626-2007 and uses the German KLEINBRENNER principle to test Class B building materials' flammability by vertically impacting them with a small flame.
Standards
EN ISO11925-2:2002E :"Test Method for Flammability of Building Materials"
GB/T8626-2007 :"Combustibility test Method for Building Materials"
Parameters
| Stainless steel plate box | 1.5mm |
| Bunsen burner | can be adjusted forward and backward |
| Diameter of burner | Φ 0.17mm burner with regulator; four ￠4mm air suction inlet |
| Flame length of Bunsen burner | 20mm ± 2mm |
| Ignition source | can be automatically tilted by 45 degrees |
| The Bunsen burner applies a flame time | 15s to the pattern |
| Flame height | Adjusted by precision adjustment valve |
| Sample rack | can move up and down and back and forth |
| Sample holders | 2 pcs |
| Touch screen display | 7 inches Effective display size 15.5cm in length and 8.6cm in width |
| Resolution | 800 * 480 |
| Communication interface | RS232. 3.3V CMOS or TTL, serial port mode |
| Storage capacity | 1G |
| FPGA driver display | "zero" start time, can run after power on |
| Controller | adopts low energy consumption processor, and automatically enters energy saving mode |
| Gas source | >95% propane gas;(user should provide for themselves) |
| Gas pressure | 10kpa~50kpa |
| Flue air velocity | 0.7m/s only on condition of burner burning and draught hood open |
| Time adjustment of continuous flame | 0 ~ 99minutes99seconds |
| Time adjustment of afterflame | 0 ~ 99minutes99seconds |
| Timer accuracy | ≤1s/h |
| Ambient temperature | 15 ℃ ～ 25 ℃; |
| Relative humidity | ≤ 85% |
| Cabinet size | 835 × 400 × 815mm |
| Power supply voltage and power | 220 V, 50 Hz, 100 W |
Send product request
Other supplier products
 |
Water-filled dummy | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-filled Dummy (Ballast Weight Dummy) is a highly practical simulation too... |
 |
AATCC Viewing Board - Test Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com TheRating Observation Boardis an intelligent monitoring system designed for real-t... |
 |
Reciprocating Wear Tester | Get a quote： Web: qinsun-lab.com Email：info@qinsun-lab。com Reciprocating wear Tester - Characteristics evaluation of the material wear resistanc... |
 |
High-efficiency Filter Scanning Test Bench | The General Ventilation Test Bench is designed to evaluate the performance of general ventilation air filters. Based on ISO 16890-2016, the system ... |
 |
Seat Ingress/Egress Simulation Tester| Testing Equipment | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The True Body Weight Ingress/Egress Tester is a specialized machine designed to ev... |
Same products
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
