Automotive interiors fogging tester

Get a quote：

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Fogging Tester is mainly used to test the evaporation of volatile components in materials such as interior plastic parts of automobiles and aircraft, polyurethane, textiles, leather, adhesives, non-woven fabrics, and thermoplastic elastomers at high temperatures.

Application

1. Evaluating Material Fogging Performance

The fogging tester is primarily used to evaluate the evaporation of volatile components from interior materials of automobiles, aircraft, and other vehicles at high temperatures. These interior materials include plastic parts, polyurethane, textiles, leather, adhesives, non-woven fabrics, and thermoplastic elastomers. The test reveals the generation of volatile substances from the materials at high temperatures, thus determining their fogging performance.

2. VOC Detection

This instrument is one of the essential instruments for VOC (Volatile Organic Compounds) detection in the automotive interior industry. The test provides evaporation data of volatile substances from interior materials at high temperatures, providing important information for controlling indoor air pollution and ensuring the health of drivers and passengers.

3. Screening Environmentally Friendly Materials

Through testing with the fogging tester, environmentally friendly interior materials that meet environmental standards can be selected, helping automobile manufacturers improve the market competitiveness of their products while reducing environmental pollution.

Standard Test

DIN 75201: Automotive trim material fogging resistance.

ISO 6452: Coated fabrics fogging behavior in vehicle interiors.

SAE J1756: Automotive interior material fogging test protocol.

BS EN 14288 & QB/T 2728: Leather and textile fogging evaluation.

PV 3920/3015: VDA-standard fog value determination for non-metallic materials.

ES-X83231. NES M0161. GM 9305P: OEM-specific fogging requirements for automotive suppliers.

Feature

Dual-Bath System:

High-Temperature Bath: 670×490×540mm, 3kW heating power (up to 150°C).

Low-Temperature Bath: 400×220×520mm, 500W cooling capacity (0–100°C).

Automated Controls:

Digital thermoregulator with microprocessor for precise temperature programming.

Programmable timer (1–9999 min) with auto-stop and end-test buzzer.

Modular Accessories:

18/8 stainless steel test cups, flat beakers, and chrome steel rings for sample mounting.

Six interchangeable cooling plates and haze/gloss measurement kits.

Safety Compliance:

CE-certified with anti-acid epoxy coating, emergency stop, and overpressure relief.

Parameters

Parameter	Specification
High-Temperature Range	Room temperature – 150°C (280°C optional)
Low-Temperature Range	0–100°C
Temperature Stability	±0.1°C (at 200°C)
Heat-Up Time	<45 min (to 150°C)
Cooling Capacity	500W (low bath)
Power Supply	AC 220V, 50Hz, 3.5kW
Dimensions	500 (W) × 650 (D) × 600 (H) mm
Net Weight	50 kg (excluding thermal media)
Data Interface	USB 2.0. remote sensor compatibility
Safety Systems	Magnetic switch, thermostat, audible alerts

Accessoriess

Standard accessories：Main unit *1. constant temperature controller (cooling device) *1. glass beakers (fogging cups) *6.circular glass plates *6. square glass plates *6 (for reflection method testing), haze meter *1. metal rings *6.Fluororubber sealing rings *6. aluminum foil *1 pack, φ80mm sampler *1. dioctyl phthalate (DOP), silicone oil (heat transfer oil) / 32Kg, diisodecyl phthalate (DIDP)

Другие товары поставщика

	Mullen & G229B Pneumatic Bursting Strength Tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Bursting Strength Testeris widely used in textile , leather , paper and other...
	Cleveland Open Cup Flash Point Tester for Oil Quality Control ASTM Standard	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)ASTM D92:Standard Test Method for Flash and Fire Points by Clev...
	Room Corner Tester，Room corner fire test equipment， ISO 13784	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction According to ISO9705 of building materials fire prevention performance standa...
	Bearing Friction Torque Measuring Instrument	Whats/App: +86 156 1874 6768 Web: standard-groups.com Bearing friction torque is an important factor affecting bearing noise, vibration, and life...
	Fabric Horizontal Burning Tester | FMVSS 302 & ISO 3795 Horizontal Flammability Test Chamber Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com E-mail：info@standard-groups。com Features Dual-Chamber Structure: Isolated e...

Все товары поставщика

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...