Seatbelt Test Dummy ECE R16
Get a quote：
Whats/App: +86 181 0160 0864
Web: gellowen.co.uk
The ECE R16 crash test dummy is a professional anthropomorphic test device representing a 50th percentile adult male. You can use it for dynamic seatbelt testing, vehicle restraint system evaluation, and occupant injury analysis. Its design accurately reflects human mass distribution and body dimensions, making it compatible with test sleds, vehicle seats, and other restraint system loading devices. The dummy complies with GB 14166-2013 and ECE R16, enabling regulatory and certification testing.
Application
You can use this dummy in a variety of scenarios:
(1) Dynamic performance testing of automotive seatbelts;
(2) Vehicle seat restraint system development and validation;
(3) Front-impact crash simulation experiments;
(4) Optimization of seatbelt design and evaluation of occupant injury risk;
(5) Regulatory compliance testing according to GB 14166-2013 and ECE R16;
(6) High-repetition crash research and laboratory experiments;
(7) Supporting automotive safety certification and seatbelt R&D projects.
Standards
You can conduct tests using this dummy in accordance with the following standards:
(1) GB 14166-2013 — Motor Vehicle Occupant Restraint System Crash Test Dummy;
(2) ECE R16 — Uniform Provisions Concerning the Approval of Vehicles with Regard to Safety Belts;
(3) ISO 15830 — Road Vehicles — Side Impact Dummies for Restraint System Assessment;
(4) Additional applicable regional or NCAP requirements for safety belt testing.
Parameters
Body Dimensions
| No. | Parameter | Dimension (mm) |
|---|---|---|
| 1 | Head Width | 160 ± 5 |
| 2 | Shoulder Width | 465 ± 5 |
| 3 | Trunk Width at Hip | 120 ± 5 |
| 4 | Hip Width | 340 ± 5 |
| 5 | Knee Center to Foot Height | 510 ± 10 |
| 6 | Hip Center to Foot Height | 990 ± 10 |
| 7 | Upper Trunk Plane to Foot Height | 1470 ± 10 |
| 8 | Head Bolt Center to Foot Height | 1600 ± 10 |
| 9 | Head Top to Foot Height | 1750 ± 10 |
| 10 | T-Point Height | 720 ± 5 |
| 11 | P-Point Height | 320 ± 5 |
Mass Distribution
| No. | Component | Mass (kg) |
|---|---|---|
| 1 | Head Assembly | 4.0 ± 0.2 |
| 2 | Neck Assembly | 0.7 ± 0.1 |
| 3 | Torso Assembly | 29.7 ± 1.0 |
| 4 | Thigh Assembly (L/R) | 12.3 ± 0.3 |
| 5 | Lower Leg Assembly | 8.4 ± 0.3 |
| 6 | Hip Joint | 3.1 ± 0.1 |
| 7 | Knee Assembly | 1.1 ± 0.1 |
| 8 | Outer Cover + Chest Pad | 1.1 ± 0.1 |
| 9 | Total Weight (with calibration mass) | 75.5 ± 1.0 |
Sensor Configuration
| Location | Sensor Type | Channel |
|---|---|---|
| Chest | Wire Pull Displacement Sensor | 1 |
| Pelvis | Wire Pull Displacement Sensor | 2 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Water Leak Detector | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Water Leak Detector primarily measures the volume and rate of gas released whe... |
 |
Flooring Materials Abrasion Resistance Tester | Get a quote： Whats/App: +86 181 0160 0864 The Flooring Materials Abrasion Resistance Tester is designed to evaluate the wear resistance of variou... |
 |
Snap Button Tester | Get a quote: Whats/App: +86 181 0160 0864 The Snap Button Tester is a device specifically designed to test the durability of buttons on electroni... |
 |
Helmet Surface Friction Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Helmet Surface Friction Tester is a device used to evaluate the frictional pro... |
 |
Helmet Strap Tensile Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The helmet strap tensile testing machine is designed to simulate tensile, impact, ... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
